-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Latest activity
What's new
BMI
Midwest Military Equipment
Eastern Surplus & Equipment Co
-
Just purchased a 1025A2 last week and I have a long list of items to work through. The current issue I’m having is with a serpentine... -
cattlerepairman replied to the thread Fdc missing m35a2.https://www.steelsoldiers.com/threads/fuel-density-compensator.23560/ You will see that post #7 addresses it. Your idea seems to be... -
I went through 3 or 4 of the correct flashers and eventually bought an inexpensive 522 style mechanical +24VDC truck flasher and put it... -
SPAM! terrible culinary experience, but if the can is useable, maybe a redeeming characteristic......how'd ya seal it?
-
Did you buy the Cannon jack or remove one from a defective flasher?
-
Coal Mule reacted to patracy's post in the thread HMMWV M1113/M1114/M1151/M1152/M1165/M1167 TMs with
Like.
Listed below are a number of the TM's for the M1114 series trucks. To save them to your computer, right click, select "save as"... -
Just picked up a M1025A2 last week and I’ve got a pretty long list of general maintenance required. Some of it I’ll tackle on my own...
-
Thanks for the info. Yes , I used to use a deuce to haul my jeep around as you can see in my avatar. Have had many CUCV’s , Humvee’s ... -
@BadAmish - that's what I am suspecting at the moment, connectivity problems. Could be a corrosion problem of the canon plugs as well...
-
peapvp replied to the thread MEP-1050 Fault Code 3665.@BadAmish - that's what I am suspecting at the moment, connectivity problems. Could be a corrosion problem of the canon plugs as well... -
@peapvp - Yes, your screen looks exactly like mine - Oil Pressure greyed out also 3664 & 3664 errors. I imagine that the old pressure...
-
Sspark500001 replied to the thread 803A engine help.we locked the cam and crankshaft gears with a rag and tried to see if there was any movement there wasn't . its too bad we don't have a...
-
-
Brandon314159 replied to the thread MEP 006A Low Voltage.You mentioned that you measured 3ohms across 15 + 16 headed to the alternator? If so, you should be drawing some current when you apply... -
Elohim1 replied to the thread M35A3 value?.Thanks for the info. Yes , I used to use a deuce to haul my jeep around as you can see in my avatar. Have had many CUCV’s , Humvee’s ... -
-
That looks like a good M35A3, but as HDN mentioned, $14K is too high in my opinion. From the photos, it definitely has the steel hood...
