• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

winter has ended, putting battereies back in five ton.

Jericho

Well-known member
1,180
69
48
Location
Landaff NH
thanks in advance brain dead hooking batteries back in my M931A2 I run a two 1000 cca group 31 set negative to battery one, , NEG post , POS lead on battery one to NEG post on battery two . POS post on battery two to ( positive) load SLAVE CABLE neg to ground BUT Positive lead to battery two pos post OR pos lead from slave receptical to negative post on battery two just to tired to even think about it And I do electrical all the time bit of ally hiemers
 

Jericho

Well-known member
1,180
69
48
Location
Landaff NH
Ughhhhhh, how about a bar napkin drawing?
Thanks for your replies. Was a long day. Slept on it fixed in twenty min this morning. Battery one to battery two. Pos to neg lead was bad. Ohms good. Continuity checked good. Wouldn’t allow current to pass. Made a new lead. Viola fixed. Dam confusing when all the normal checks say “ I am Good” and it isn’t finally slaved in a new cable. Worked. Fired right up. All good now. Thanks again guys and gals
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks