- 6,137
- 8,607
- 113
- Location
- Papalote, TX
I have had hell with ducting for my project, I purchase this duct a couple years ago and got home before taking it out of the box and seeing the upper and lower section had completely separated, I bought one last week only to get home before noticing it was missing a piece making it unusable, I think I see a pattern here![Eek! :eek: :eek:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Anyway it looks like the duct is made out of ABS plastic so I ask the great collective here on suggestions on the best sealant/bonding to use on this.
It would be MUCH easier to apply if it came in a caulking type tube as there is about 12 feet of bead to lay.
I will also rough up the surface which appears to be the failing point of the original bonding material.
![Duct.jpg Duct.jpg](https://www.steelsoldiers.com/data/attachments/666/666530-08e12c8dea935fd805570cd39ebb75bc.jpg)
Anyway it looks like the duct is made out of ABS plastic so I ask the great collective here on suggestions on the best sealant/bonding to use on this.
It would be MUCH easier to apply if it came in a caulking type tube as there is about 12 feet of bead to lay.
I will also rough up the surface which appears to be the failing point of the original bonding material.
![Duct.jpg Duct.jpg](https://www.steelsoldiers.com/data/attachments/666/666530-08e12c8dea935fd805570cd39ebb75bc.jpg)