• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Has anyone rebuilt the wiper motors? (M54A1)

jjmartinez1982

New member
26
1
1
Location
Rio Grande City, TX
I tried using them today and the manual lever inside would go back and forth but the blade hardly moved. Are they rebuildable or am I better off buying some?


Sent from my iPhone using Tapatalk Pro
 

jjmartinez1982

New member
26
1
1
Location
Rio Grande City, TX
Ok that splined nut at the end of the arm (at least that’s what’s on my vehicle) was loose on both motors! Tightened them up and they’re working now. Kind of. The drivers side wipes good, the passenger side might need some oil. I don’t have any so I’ll have to get some after work tomorrow.

My next problem is the wipers won’t stop running now until the pressure bleeds off haha I’m gonna try pulling the controller off and giving it a cleaning followed by some lube. Something is sticking in there and I can feel it “pop” when I back down to try and turn them off.


Sent from my iPhone using Tapatalk Pro
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks