• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

NHC 250 Oil Pressure

archmark

Member
267
20
18
Location
Woodway, TX
In looking at the AM General M939 series trucks on GP, it seems that every one of them seems to run a different oil pressure, anywhere from 35-95 PSI., low or high miles/hours notwithstanding. Is there a "normal" oil pressure for the AMG M939 series or do they really vary that much?.

All I can think of is that the reading taken by the GP personnel during their inspection prior to auction was done when some of the trucks were warmed up and others were cold. Just curious...
 

bchauvette

New member
810
12
0
Location
Easley SC USA, 29640
I personally stay away from a 15 psi warm oil pressure look at it as a minimum acceptable number. It will only go down as mileage increases. Start feeling cofortable at 30 psi warm idle. An example correct oil pressure statement should read something like : 30 PSI 700 rpm 110F.
 
Last edited:
Top