VP17IFT
New member
- 76
- 2
- 0
- Location
- Chancellor/AL
Cab floor and seat mount
Cleaned up the flaking paint on the passenger side floor then primed with rusty metal primer andtop cotedwith bedliner rolled on. then i finished the mount for the seat, made up of 2x2 tubing with 3/8 16 bolts welded in and 2" flat stock for reinforcement. The seat is a Mastercraft with a spring steel base. i also installed some 2" polyethelene packing foam in the back wall of the cab for insulation. Next up is to do the driver side.![tn_2013-05-29_18-14-04_91.jpg tn_2013-05-29_18-14-04_91.jpg](https://www.steelsoldiers.com/data/attachments/296/296779-05781033e970564b244f726978320049.jpg)
![tn_2013-05-29_18-13-47_2.jpg tn_2013-05-29_18-13-47_2.jpg](https://www.steelsoldiers.com/data/attachments/296/296778-ca647b362baae610c645f2ef34853c3f.jpg)
![tn_2013-05-29_18-13-01_746.jpg tn_2013-05-29_18-13-01_746.jpg](https://www.steelsoldiers.com/data/attachments/296/296777-cfde24d4bb2f19b8c9d7a0a2ecaa8fc6.jpg)
![tn_2013-05-29_18-05-19_552.jpg tn_2013-05-29_18-05-19_552.jpg](https://www.steelsoldiers.com/data/attachments/296/296775-c7446d51011952dbfd7b2d9ba32ef313.jpg)
![tn_2013-05-29_18-04-56_143.jpg tn_2013-05-29_18-04-56_143.jpg](https://www.steelsoldiers.com/data/attachments/296/296774-2be0b759a87e16d6dec4cb1c290a0e2d.jpg)
![tn_2013-05-29_18-04-49_661.jpg tn_2013-05-29_18-04-49_661.jpg](https://www.steelsoldiers.com/data/attachments/296/296773-b9c0e0c70885ea2166bcdcf331344678.jpg)
![tn_2013-05-29_18-04-35_403.jpg tn_2013-05-29_18-04-35_403.jpg](https://www.steelsoldiers.com/data/attachments/296/296772-9edafefcbc48a3aca37b9aba8e62094d.jpg)
![tn_2013-05-29_18-05-29_409.jpg tn_2013-05-29_18-05-29_409.jpg](https://www.steelsoldiers.com/data/attachments/296/296776-2614dbda7b022932458a824043c4aaf1.jpg)
Cleaned up the flaking paint on the passenger side floor then primed with rusty metal primer andtop cotedwith bedliner rolled on. then i finished the mount for the seat, made up of 2x2 tubing with 3/8 16 bolts welded in and 2" flat stock for reinforcement. The seat is a Mastercraft with a spring steel base. i also installed some 2" polyethelene packing foam in the back wall of the cab for insulation. Next up is to do the driver side.
![tn_2013-05-29_18-14-04_91.jpg tn_2013-05-29_18-14-04_91.jpg](https://www.steelsoldiers.com/data/attachments/296/296779-05781033e970564b244f726978320049.jpg)
![tn_2013-05-29_18-13-47_2.jpg tn_2013-05-29_18-13-47_2.jpg](https://www.steelsoldiers.com/data/attachments/296/296778-ca647b362baae610c645f2ef34853c3f.jpg)
![tn_2013-05-29_18-13-01_746.jpg tn_2013-05-29_18-13-01_746.jpg](https://www.steelsoldiers.com/data/attachments/296/296777-cfde24d4bb2f19b8c9d7a0a2ecaa8fc6.jpg)
![tn_2013-05-29_18-05-19_552.jpg tn_2013-05-29_18-05-19_552.jpg](https://www.steelsoldiers.com/data/attachments/296/296775-c7446d51011952dbfd7b2d9ba32ef313.jpg)
![tn_2013-05-29_18-04-56_143.jpg tn_2013-05-29_18-04-56_143.jpg](https://www.steelsoldiers.com/data/attachments/296/296774-2be0b759a87e16d6dec4cb1c290a0e2d.jpg)
![tn_2013-05-29_18-04-49_661.jpg tn_2013-05-29_18-04-49_661.jpg](https://www.steelsoldiers.com/data/attachments/296/296773-b9c0e0c70885ea2166bcdcf331344678.jpg)
![tn_2013-05-29_18-04-35_403.jpg tn_2013-05-29_18-04-35_403.jpg](https://www.steelsoldiers.com/data/attachments/296/296772-9edafefcbc48a3aca37b9aba8e62094d.jpg)
![tn_2013-05-29_18-05-29_409.jpg tn_2013-05-29_18-05-29_409.jpg](https://www.steelsoldiers.com/data/attachments/296/296776-2614dbda7b022932458a824043c4aaf1.jpg)