Five ton PTO part Identifier

[highfavor1004]

Hey guys,
I got out and work on the M246 today and finally pulled the PTO off to find that the was a gear the was broke off. I found the Gear in the TM9-2320-211-34-2-3 on page 17-816 under part five but it does not list the part name. I need to fine this part to repair my PTO can any of you guys help. Thank you for your time

 

[JCKnife]

I can't help you find one but it's gotta be called the input gear.

 

[KsM715]

I know a local salvage yard that has some busted PTO's (housings are busted and cracked). If he's open tomorrow I'll see if they are 5ton or 2.5 pto's and see if that gear is good. If he's not open tomorrow it will be friday before I can get there.

 

[highfavor1004]

10-4 thank you both

 

[area52]

Not to hijack the thread, but can you (KsM715) see if they have any speedometer adapters also?

thanks

 

[M543A2]

I do not know the exact name; it could be a countershaft gear, idler gear, or drive gear. Since you have good photos, I would send them to info@memphisequipment.com and see what they say. Another possibility is onfo@SamWinerMotors.com in Akron, Ohio. They specialize in winches.
Good Luck! Regards Marti

 

[M543A2]

Sorry; my big fingers do not like these keyboards! That should have been info@SamWinerMotors.com
Marti

 

[highfavor1004]

I do not know the exact name; it could be a countershaft gear, idler gear, or drive gear. Since you have good photos, I would send them to info@memphisequipment.com and see what they say. Another possibility is onfo@SamWinerMotors.com in Akron, Ohio. They specialize in winches.
Good Luck! Regards Marti

Thank you

 

[KsM715]

Not to hijack the thread, but can you (KsM715) see if they have any speedometer adapters also?

thanks

Pm sent

 

[m16ty]

What was the voltage reading on it.

This could have been caused by a bolt in the place of the shear pin. Better check that shear pin when you get it back together.

 

[ODdave]

Holy crap, How dose the counter shaft gear look?

 

[highfavor1004]

as far as i can see the counter shaft gear looks fine

 

[highfavor1004]

has anyone been able to locate the gear for sale

 

[5tondeuce]

Hi,
I bought a new gear from memphis equipment for my PTO. It was NOS and expensive but I needed it $251.

 

[KsM715]

The place was closed, I'll check in on friday.

 

[highfavor1004]

okay thank you

 

[indy4x4fab]

S.L.E. 812 476 6154

This place help me find a couple parts for my two pto's off my k30 build. The old man knows his stuff and deals in these sorta old pto's more then some of the other shops.

 

[KsM715]

Bad news. The owner said they cleaned out the parts loft and threw out a bunch of stuff. He doesn't think they have those ptos anymore. The yard was busy and he didnt seem real interested in getting off his piece of equipment to go look for something that may not be there so I didnt push to see if he would let me go look.