• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What's missing in pic, plug? no plug?

lawdog1623

New member
274
1
0
Location
Texas
ok heres a puzzling question. logic stands to reason that if theres a threaded hole somewhere, theres supposed to be a plug in it. On the engine ive seen many of these plugs threaded into misc areas of the manifold, block etc. I crawled up under the m35a2 to trace leaks. I then noticed that at the bottom of the bell housing (where the flywheel is located) there are 2 plugs. Im not certain there are 2 but i thought i remembered seeing 2 of them. Then there is a large threaded hole that is quite large approximately the size of a silver dollar in between the two plugs. The other two are about the size of a quarter and these holes have square drive plugs. The largest hole that is missing the plug is directly in the bottom center of the housing that holds the flywheel. This particular hole is threaded and it appears as if theres supposed to be a plug there. I checked the tm's and cant find this detailed sufficiently (for me anyway) enough to give me any direction. Does anyone know if this area holds fluid, and if theres supposed to be a plug in it? Second question- can someone explain how i go about checking fluids in the transmission? What weight to use and how much? I havent downloaded this part of the tm yet and im on a computer at work. I wont be able to get it before my days off. I would like to figure this all out so i can do the work. Thanks
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
I see that you have not read the operators manual yet. I would suggest that you do as your truck has many other surprises. What you observed is correct as it is. Don't plug that hole. The TM explains it much better than I and you will be smarter for checking it out.
 

patracy

Administrator
Staff member
Administrator
14,639
4,817
113
Location
Buchanan, GA
Like Kenny said, read the TM's. If I would have spent 2 minutes removing the plug on the bobber I got, I wouldn't have had to spend a half a day cleaning up the oil soaked clutch.
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
I wonder if he's talking about the emergency brake fluid drain plug?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
Searching the forums is sometimes helpful.

 
Last edited by a moderator:

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
Searching the forums is sometimes helpful.

Searching the forums is always helpful!

http://www.steelsoldiers.com/deuce/49900-missing-plug-here.html

http://www.steelsoldiers.com/deuce/35216-help-bad-pic-included.html

http://www.steelsoldiers.com/deuce/70530-flywheel-housing-bolt-missing.html

http://www.steelsoldiers.com/deuce/32914-there-supposed-something-hole.html

http://www.steelsoldiers.com/deuce/53977-whats-missing-here.html

http://www.steelsoldiers.com/deuce/53696-am-i-missing-something-transmission.html

http://www.steelsoldiers.com/deuce/22590-missing-plugs-bad.html

http://www.steelsoldiers.com/deuce/4248-missing-plug.html
 
Last edited by a moderator:

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
And sometimes, reading the link before posting, is helpful. :doghead:
 
Last edited:

clinto

Moderator, wonderful human being & practicing Deuc
Staff member
Administrator
Super Moderator
Steel Soldiers Supporter
Supporting Vendor
12,596
1,132
113
Location
Athens, Ga.
And sometimes, reading the link befre posting, is helpful. :doghead:
What makes you think I didn't read it?

Where'd you think I found all those links? I certainly didn't search for them, I am trying to fit in more around here.

rofl
 

lawdog1623

New member
274
1
0
Location
Texas
its definitely the fording plug on the bottom of the flywheel housing. I found it on a link after searching the forum. Come on guys! im still learning. Not trying to ruffle feathers.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
Instead of a smilly shooting self in head, how about one that shoots it self in the foot.
 

islandguydon

Well-known member
3,724
783
113
Location
Michigan
I was under the impression it was the fording plug. Right next to it is a plug that goes no where but is threaded in. I learned before you go swimming you swap the plug into the open hole.
 

Recovry4x4

LLM/Member 785
Super Moderator
Steel Soldiers Supporter
34,012
1,808
113
Location
GA Mountains
Lawdog, you need to stick around here for a while. It's nice to have members who can take a little ribbing without pouting. A+ to you Sir. Now, about that TM. . . . LOL
 

lawdog1623

New member
274
1
0
Location
Texas
Well to prove my devotion i comped out an hour from working the mean streets to read tm's. I SHALL NEVER ASK ANOTHER IGNORENT QUESTION!! I grovel at the foots of all here who are mighty and knowledgeable. I hereby designate myself ss latrine officer for 14 days. On a side note does anyone know how much coolant one of these things hold or how to check it? (insert future suicidal emoticon here)
 

Speddmon

Blind squirrel rehabiltator
Super Moderator
Steel Soldiers Supporter
4,640
28
38
Location
Cambridge, Ohio
My personal favorite is, "Hey, I just recovered my truck and drove it 30,000 miles home. How do I check the brake fluid?" but that one has been beaten to death
 

Warthog

Moderator
Super Moderator
Steel Soldiers Supporter
13,774
232
63
Location
OKC, OK
You might want to spend a few more minutes reading the Lube Order. It will have all the fluid types and quantities.
 

73m819

Rock = older than dirt , GA. MAFIA , Dirty
Steel Soldiers Supporter
In Memorial
12,195
325
0
Location
gainesville, ga.
OR this one "HELP, started the deuce, how do I shut it off", or this one "HELP, how do I start my deuce", could have been a lot worse like "WHAT IS THE RED BUTTON FOR"
 
Last edited:
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks