• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What's this part called?

dilvoy

Active member
733
25
28
Location
San Francisco, Ca.
I have a M1009 that needs the vacuum controller for the transmission, that is located on the right hand side of the injector pump. Does anyone know the exact name for this part and possibly a civilian part number? Thanks.
 

rizzo

Active member
2,841
8
38
Location
Port Huron, MI
dilvoy said:
I have a M1009 that needs the vacuum controller for the transmission, that is located on the right hand side of the injector pump. Does anyone know the exact name for this part and possibly a civilian part number? Thanks.
I had to get one of those. I can look on the box tonight and see if I have the part number
 

n1vbn

New member
74
1
0
Location
derry,NH
You can get them at your local Chevy/GMC dealer Around $70. It is called the Vacuum Regulator Valve VRV for short.

Had to replace mine on my M-1009 and not having the adjustment block it was the third adjustment that shiffted fine.

1st to 2nd = 15 MPH
2nd to 3rd= 25 MPH with light throttle fully warmed up. It will shift a little later when cold but otherwise is fine. Don't forget to replace the 2 inch long hose that connects the steel line to the modulator on the right side of the tranny.
 

max1008

New member
337
3
0
Location
Blue Bell, PA
I am doing mine tonight and I see a small "distribution" block that connects to the regulator. It is also made of rubber and is cracking. Any idea if an auto parts store would stock it?
 

doghead

4 Star General /Moderator
Staff member
Super Moderator
Steel Soldiers Supporter
26,246
1,179
113
Location
NY
The block is used just to keep from getting the hoses mixed up(switched).
 

Keith_J

Well-known member
3,657
1,323
113
Location
Schertz TX
Just remember "T to T". Top to transmission. Meaning the bottom is to the vacuum pump.

The vacuum regulator valve ages and the foam filter within decomposes, plugging the vent which causes it to fail closed. Yes, that was my experience. It is nearly impossible to clean as it is clipped together with both plastic and metal clips.

I got mine from that online retailer named after a South American River. $65 and change.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks