SOURCE Info? : HEAT SHRINK INSULATION or WRAP

[USAFSS-ColdWarrior]

I'm looking for a SOURCE (Manufacturer preferred) from which to obtain HEAT SHRINK Wire Bundle Insulation or Wrapping "Tape" that could be LOW TEMP "shrunk" around irregular shaped objects to provide containment and/or protection from low pressure fluid seepage.

- The LOW TEMP requirement is a high value factor in product selection.

- TUBE forms could be used in smaller applications - 4"-6"max. diameters (would actually be irregular profiles, not true circular cross-sections).

- WRAP material (think: SARAN WRAP) with self-bonding, LOW TEMP heat contraction properties would be used for cross-sections greater than any available TUBING would accomodate.

I am posting this in the ELECTRICAL Forum since I have prior experience with similar material from back in my "aviation days" when I worked in avionics/electrical design for Mitsubishi Aircraft International (1979-1986), but have long since discarded all of my reference material and notes.

THANK YOU!

 

[BrushMaster Builder]

Could you please explain what you are trying to accomplish and exactly what it is you are trying to protect?

 

[peashooter]

I work in medical device mfg and Zeus is the big tubing/heat shrink mfg. not sure if they have what you need or not but it would be a good place to look http://www.zeusinc.com/extrusionser...etubing.aspx?gclid=CJ7fi_bakbYCFetAMgodxDEAAw

otherwise would f4 self fusing silicone tape do the trick? No heat required then

 

[USAFSS-ColdWarrior]

Could you please explain what you are trying to accomplish and exactly what it is you are trying to protect?

BMB:
For proprietary reasons, I'll send you a PM asap. The application is not for public discussion at this time.
Thank you.
John

 

[USAFSS-ColdWarrior]

I work in medical device mfg and Zeus is the big tubing/heat shrink mfg. not sure if they have what you need or not but it would be a good place to look http://www.zeusinc.com/extrusionser...etubing.aspx?gclid=CJ7fi_bakbYCFetAMgodxDEAAw

otherwise would f4 self fusing silicone tape do the trick? No heat required then

PS
Thanks for that link. I'll check it out, and the specs for the product you mentioned and see where that leads.
Thanks
John

 

[MarcusOReallyus]

otherwise would f4 self fusing silicone tape do the trick? No heat required then

That's what I was thinking.


https://duckduckgo.com/?q=self+fusing+silicone+tape

 

[AN/ARC186]

Try this.
http://www.te.com/en/about-te/news/...ychem-rt-5555-high-temp-heat-shrink-tape.html

and
http://www.raychem.com/

 

[USAFSS-ColdWarrior]

Thank you Gentlemen!

At this point, we'll be experimenting with some of the self-fusing silicone wrap. Hopefully, the search is satisfied.