Sneaker
New member
- 102
- 3
- 0
After a lot of searching the forums I decided to start a thread listing which parts off a 939 series truck would work on our m35 trucks. Please reply if you can add any. I haven't tried any of these but after researching found the following...
Will fit;
Doors and door hardware
Steering wheel
Horn and button hardware
Heater system with modification
Headlights, Tail lights, Turn Lights, and Marker lights their hosings and brackets
Gauges (Not sure about speedo/tachs)
Battery holders
Battery cables
Batteries and the terminals
Turn Signal Lever
3 Lever light switch
Power Switch
Indicator Lights on dash
Driver Seat
Windshield hardware will fit, but not the actual windshields
Cargo cover with modification (sized for deuce bed)
Bows and uprights for the cargo bed but not the troop seats
Tires will fit in dual configure (11.00R20) but not the wheels
Glad hands
NATO slave port
Lug nuts
Thimbles
Trailer plug cover
Air governor
Bulbs
Axle drain plugs
Mud flap bolts
Shackles
Bridge plate
Alternator (check pulley size)
Tailgate (must be same style as replacement dropside to dropside etc.)
Will not fit;
Front Bumper (Frame to tall and not the same)
Obviously the engine, transmission, transfer case, brakes, and axle components
Most if not all body and cab body
Fuel tank (won't fit and no sender in tank)
Will fit;
Doors and door hardware
Steering wheel
Horn and button hardware
Heater system with modification
Headlights, Tail lights, Turn Lights, and Marker lights their hosings and brackets
Gauges (Not sure about speedo/tachs)
Battery holders
Battery cables
Batteries and the terminals
Turn Signal Lever
3 Lever light switch
Power Switch
Indicator Lights on dash
Driver Seat
Windshield hardware will fit, but not the actual windshields
Cargo cover with modification (sized for deuce bed)
Bows and uprights for the cargo bed but not the troop seats
Tires will fit in dual configure (11.00R20) but not the wheels
Glad hands
NATO slave port
Lug nuts
Thimbles
Trailer plug cover
Air governor
Bulbs
Axle drain plugs
Mud flap bolts
Shackles
Bridge plate
Alternator (check pulley size)
Tailgate (must be same style as replacement dropside to dropside etc.)
Will not fit;
Front Bumper (Frame to tall and not the same)
Obviously the engine, transmission, transfer case, brakes, and axle components
Most if not all body and cab body
Fuel tank (won't fit and no sender in tank)
Last edited: