Hampshire, Illinois to GA rally or to FL, wood crate(M-Gator bed)

[Flingarrows]

The pickup is not too far from where I work 2 day/week, and Lyons is about 45 minutes from there in traffic. I will be in Ohio next week. If pickup can be the week after, I can pickup after work and drop off in Lyons, as long as they are open after 5pm.
Or I can arrange to get to Eagle. Just let me know what will work out ok

 

[Stonepicker1]

The pickup is not too far from where I work 2 day/week, and Lyons is about 45 minutes from there in traffic. I will be in Ohio next week. If pickup can be the week after, I can pickup after work and drop off in Lyons, as long as they are open after 5pm.
Or I can arrange to get to Eagle. Just let me know what will work out ok

Well, I'm kind of at a lost with this. I need the Gator bed picked-up from the seller soon. No hurry on this part, but it would have to go to a freight company or another SS member that could get it to the GA Rally or closer to Florida. There's no hurry to get it to Florida.
"Flingarrows" Thank for helping me out, Pickup can be next week, just seeing if someone can give you a hand here or have a better ideal.

 

[eagle4g63]

Like I said, more than happy to help, just let me know what I can do.

 

[Stonepicker1]

Update: "eagle4g63" picked the gator bed up today. He had a friend with him to help. Looks to be around 200 lbs. I will be looking for a shipper in his location later.
Thanks "flingarrows" for your offer to do the pickup also.

 

[Flingarrows]

Good deal, glad you got it on its way

 

[Stonepicker1]

Eagle4g63, sent you a pm. Got a shipping quote of $229.

 

[caliber1]

Phil, I'll be coming through there in a week and a half or so, and could get it as far as lake county for a little fuel money. I'll have an empty 18' trailer and the bed of the 250 will be empty as well.

 

[patracy]

If you can get it down to West Georgia, East Alabama, or Atlanta during the week, I can pick it up, then bring it to the rally.

 

[jacobsk]

Stonepicker1: PM me with questions regarding the installation of the box if you have any questions or troubles. I have a lot of experience with these machines (the A1, A2, and even the A3 series M-Gators).