- 14,258
- 1,759
- 113
- Location
- Dayton, OH
Matt, glad you are going to make it.
PS stay away from my railroad cucv!
Too funny on both.
You guys are assuming that we get the shelter. In the previous 5 we only got it 80% of the time.....
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2014 haspin info thread, June 11-15th
- Thread starter gungearz
- Start date
Too funny on both.
You guys are assuming that we get the shelter. In the previous 5 we only got it 80% of the time.....
I hope to get the half built house thingy on the hill. Ferro and I still plan on rolling in about lunch time Wed. I just finished going over the M814, and plan to load it with stuff this afternoon, then load the M37 in the bed around 1830 tonight.
kipman
Active member
- 2,514
- 15
- 38
- Location
- Lancaster Ohio
We are leaving Lancaster Thursday morning.
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
You'll probably get lost......
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Nothing a little "elf'in magic" won't fix!
Besides, Brett will be there, he'll have "adult supervision"!
hdexpert
Member
- 602
- 8
- 18
- Location
- Worthington Ohio
My buddy Jim and I will be rolling in Friday night around 8.
M37 is in the bed of the 5 ton.
. Went by the supermarket to buy some food for Haspin. When I came out, had 3 people standing around the M814 looking at the "rig". Guy offered to buy M37. I told him he didn't have enough money.
. Went by the supermarket to buy some food for Haspin. When I came out, had 3 people standing around the M814 looking at the "rig". Guy offered to buy M37. I told him he didn't have enough money.
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
I welded a 2" receiver to the rear of the m971 semi trailer so I can bring the VW rail buggy.. I think it looks factory
I should be there around 7-8pm Wednesday
I should be there around 7-8pm Wednesday
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
Looks good!! Are you still using the single 120 volt 20 plug? I am finishing up getting my electrical distrubution set up tomorrow and Tuesday.I welded a 2" receiver to the rear of the m971 semi trailer so I can bring the VW rail buggy.. I think it looks factory
I should be there around 7-8pm Wednesday
View attachment 497683View attachment 497684
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
Will it be possible to get 2 separate legs of 110? This is what I'm working with, input- 2x 110V output- 1x 220v
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
Yeah I can drop 2 120 circuits out of a back to back box, no problem
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
awesome! I believe Matt would like to plug his S280 in as well.. he will be set up right beside me (hopefully in the same spot i was in for the fall rally)
212sparky
Well-known member
- 1,822
- 38
- 48
- Location
- Monroe/ Ohio
Ok no prob
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Jeff, sorry if you took offense on my comment about watching instructional videos... we understand that permission was given and appreciate the knowledge that goes into the videos... but when I'm on vacation, the last thing I wanna see is a tool... I'm sure we'd all love to come out, have fun, hang out, not break anything, eat good grub and just gaze at the stars being blinded by gimps campfire...Is there anyone that would want to help raise the 40' flagpole?
View attachment 497477View attachment 497478
BTW - I am the one who brought the army training videos last year. There were only a couple and they were 10 minutes or less each. They were very relevant to army trucks operation and repair. I asked for approval before we played them, and it seemed a majority wanted to see the videos.
This is just a good-natured, friendly response to the two naysayers who were saying unkind things about the army training videos.
What else can anyone ever ask for....?...
It's just great to be with everyone and I will except it no matter what.....
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
Well.. It's official.. (Barring some catastrophic failure) this will be the first year for the haspin mobile truck wash! So get em muddy boys!! We can hose em down at the end of the day..
gungearz
New member
- 1,719
- 4
- 0
- Location
- northwestern indiana
Hey josh... does that have the 3" hoses...? maybe we can strip layers of paint off some of these trucks..
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
it has 2X 1.5" hoses, but could support a 2.5" hose with no problem.. I just dont have any 2.5" nozzles.. the pump will crank out 250PSI at 500GPM..
jdknech
Active member
- 1,095
- 6
- 38
- Location
- Jeffersonville, Indiana
at full power with the nozzles on "jet" setting it would prolly take some paint off.... but in other news, who's up for a water gun fight??
- 14,258
- 1,759
- 113
- Location
- Dayton, OH
Actually, it rains and if the sun pops up it's dry again in 15 minutes..............
I have to get my tow bar out for Rebel tonight for some mission he is attempting.
I'll fuel up the "winged" Dodge tonight and load water and food into the trailer.
I have to get my tow bar out for Rebel tonight for some mission he is attempting.
I'll fuel up the "winged" Dodge tonight and load water and food into the trailer.