Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
Thanks.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Am i expecting too much , or right on target
- Thread starter orrisd4
- Start date
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
My M35A2 sets for months at a time and even a year. Touch the starter button and she fires. These old trucks can take allot. I have never abused it though. Good maintenance.
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
One thing that made mine more enjoyable besides the 11X20's was to add new seats. I used springer bottoms with the HMMWV high backs seats, there are many options out there.
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Instead of towing your drunk buddies out park on top of them.
nk14zp
Active member
- 2,636
- 17
- 38
- Location
- Columbia Falls Maine
Did that fix his leak?turned Carlo's truck
Bob H
Well-known member
- 3,142
- 161
- 63
- Location
- Huron National Forest, Michigan USA
It would seem so...
Carlo
New member
- 1,364
- 20
- 0
- Location
- palazzago italia
Yes it did. Haha. I'm sorry I don't know why the photo is turned after.
Any way back to the subject thread the 35 is a simple truck and if you take care of her you will see she works out to be what you want.
- 157
- 0
- 0
- Location
- Washington, IA
You will not find a better wood hauler! However, I have operated backhoes for years, and in my experience, if you get it stuck to the point that you can't get yourself out with the hoe and bucket, I'm not sure the deuce will help you. Good luck with it.
orrisd4
Member
- 72
- 10
- 8
- Location
- HoneyGrove Pa
I wish it was one of my friends , but no this is my uncle .
Third DUI and he drinks 30-40 cans a day, blew a .29bac sitting in a drainage ditch , with an open one in hand.
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
Indeed! My bobber tried to pull out the roofer's dump truck after he busted through our septic tank (ugh). But all it did was spin even in 4x4. I pulled the normal deuce over (on 46s though) and it pulled it out without a wimper. I didn't even know it was back there. When it comes to a dead weight pull, it's all about traction. But even then, if it's buried, don't expect it to just pluck stuff right out.
M35A2's are a very capable truck, just don't abuse it and remember, even though parts can be big and heavy, they can be man-handled better than some of the bigger truck parts. Putting 2 or 3 9.00x20 tires and rims in your pickup won't overload it, nor take up every bit of space that a single tire from a 900 series might. While it is better to have two people handle some things, one can do it if needed.
61sleepercab
New member
- 622
- 3
- 0
- Location
- Walton, West Virginia
A M35a2 with a winch and some snatch blocks can move all kind of stuff. My International R-162 with gear driven winch has pulled cars, loaded dead dozers and pulled downed trees with ease. You may want to add some kind of locking differentials as open axles will only power one side of the axle so really a 6x6 is a 3x3 when things are slick. I have heard that NDT military tires are not the best in mud or snow. .... Remember these trucks are 40 year old technology made for off road/unimproved roads and they are not made to operate at high speeds. Newer trucks are quicker to drive but can never do the work the old Deuce can do without breaking a sweat.
tactical45
New member
- 20
- 0
- 1
- Location
- pgh pa
Orrisd4
Not sure if this is what you are looking for but here is a deuce I found last night when I was looking for a 5 ton.
http://www.torquelist.com/posts/2064/idaho-autos-for-sale--m35a2--2-1-2-ton
Not sure if this is what you are looking for but here is a deuce I found last night when I was looking for a 5 ton.
http://www.torquelist.com/posts/2064/idaho-autos-for-sale--m35a2--2-1-2-ton
- 14,640
- 4,820
- 113
- Location
- Buchanan, GA
Please make note of the big yellow banner up top about not listing active or upcoming auctions or ads.
BTW, that ad is no longer active.
- 14,261
- 1,760
- 113
- Location
- Dayton, OH
It is tough to figure out but I believe he already has a Deuce. He isn't asking ahead of time, it's after the fact.
Had me confused too.
Had me confused too.
tactical45
New member
- 20
- 0
- 1
- Location
- pgh pa
sorry about the ad posting violatioin, Orrisd4 and forum members, just learning the ropes here.
orrisd4
Member
- 72
- 10
- 8
- Location
- HoneyGrove Pa
Sorry to have confused you guy, yes i already have the truck , a '68 kaiser jeep w/w, i already have her running and am working on all her issues , i just keep reading on here , and half of it contradicts the other half .
i just wanted to make sure i wasnt being unrealistic in my goal , you people have been invaluable in that, so thank you all.
i just wanted to make sure i wasnt being unrealistic in my goal , you people have been invaluable in that, so thank you all.
- 14,261
- 1,760
- 113
- Location
- Dayton, OH
Contradicts? You must realize that is exactly why we have rules and work to police the misinformation that runs rampant on the rest of the Internet. One only has to look at any thread with registration, insurance, CDL, or GL in the discussions to see that there is incorrect and yes, even downright illegal advice being given.
Capitalization?
I run 11R-20s on my bobber. Firestone T-831s. Stock rims. No problems. 85psi on the steers and 55psi on the rears. My duals do not touch and my truck drives great....for a Deuce.
Yessir! You are correct. Firestone T-831s work well for me.