• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

M934 recovery for me from Ft. Sam, TX

archmark

Member
267
20
18
Location
Woodway, TX
[h=2]If I Hand't Mentioned It Before...[/h]...I'm living proof that insanity runs rampant in my family, at least in my own genes, as evidenced by: http://www.govplanet.com/jsp/s/item/551711?h=4-22/6-22&reloadCode=close,551711,1426694981267.

Why am I NEVER so 'lucky' at the casino? Anyway, here I am, not half through 'tweaking' my recently acquired M185A3, and 'this' happens. SOMEBODY PLEASE STOP ME BEFORE I BID AGAIN!!!

Anyway, is anybody interested in making the recovery for me from Ft. Sam to a close RV storage in SA or better yet, drive it the 185 miles North up I-35 to Waco? My typical unrealistic work deadlines make it impossible for me to get away and retrieve it until at least early April, so let me know what it's worth to you, whichever way you choose to go.

Let me here from you if you're interested and I'll double up on my meds. Comments regarding my mental 'condition' are also accepted.

Thanks...

Mark
(254)722-5930
archmark@aol.com


 
Last edited by a moderator:

Artisan

Well-known member
2,761
227
63
Location
CDA Idaho
That is so close!

Just get it towed / flatbed'd home...piece of cake!

She looks sweet! She has her ladder, tires look nice...

Find a LOCAL motor home / truck towing company and send them for it!
 

KansasBobcat

Member
641
8
18
Location
San Antonio, TX
Ke5eua is in Temple and has advertised on SS. Sounds like he knows what he is doing. I'm in Sa Antonio but no room to store in our neighborhood. If I can help let me know. Bob
 

ke5eua

Well-known member
2,568
40
48
Location
Baton Rouge (Central), LA
I'm headed to fort Riley today for a recovery bringing it college station area for someone. If bandsman can store it I'll get it to you.

If it's off the same lot as the one I'm getting tomorrow I won't be back in time for the deadline for removal.
 
Last edited:

DocPA

Member
101
0
18
Location
Phoenix,Az
Just a thought here, I looked at that truck and in the pics its running by the tach but showing zero air pressure. Might be, might not be an issue.
 

ke5eua

Well-known member
2,568
40
48
Location
Baton Rouge (Central), LA
A short hose made up with the correct fittings to bypass the drier is a must have in every toolbox.
It definitely will be now. We were crawling under the truck filling air lines trying to figure out what was leaking and my buddy found an unused hard line that I can only guess was disconnected when the abs upgrade was done but not taken out as cutting a few tip ties would have been to much.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks