• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Survival 109 build

Another Ahab

Another Ahab

Well-known member
18,003
4,565
113
Location
Alexandria, VA
Jeepsinker said:
Right, because there isn't any armor out there yet that can't be defeated by something shoulder fired.
Click to expand...
rustystud said:
That's exactly right !
Click to expand...
Just reading the other day in the latest issue of American Rifleman (the NRA magazine), that the weapon of choice for some of the LRRP teams in Viet Nam was an RPG (they'd get partisans to carry their extra rounds).

And apparently they'd doctor up the rounds by taping 16d nails and packets of tear gas directly to them, to get the most out of every round (anti-tank, antipersonnel, anti-ALL-and everything).
 
Last edited:
QUADJEEPER

QUADJEEPER

Member
Steel Soldiers Supporter
797
6
18
Location
Winter Springs, FL
Another Ahab said:
You know, there is some kind of insulated structural material that's used in post-and-beam construction for roofing. It might work for this application. Because you're right: a cold floor kills all sense of comfort, even if the air temp in the space is toasty.

I'll see if I can't find something about that, and post it up.
Click to expand...
Still have some foam insulation left for the floor. Should be all good.
 
rustystud

rustystud

Well-known member
9,284
2,996
113
Location
Woodinville, Washington
Another Ahab said:
Just reading the other day in the latest issue of American Rifleman (the NRA magazine), that the weapon of choice for some of the LRRP teams in Viet Nam was an RPG (they'd get partisans to carry their extra rounds).

And apparently they'd doctor up the rounds by taping 16d nails and packets of tear gas directly to them, to get the most out of every round (anti-tank, antipersonnel, anti-ALL-and everything).
Click to expand...
It's kinda of funny. I went into tanks because one, there cool and two I thought if I ever had to go into combat I would be safe inside it ! Then in the first day of orientation I'm told I have a life expectancy of 5 minutes in combat ! That every little Tom, Dick and Harry with a "RPG" can take out my tank !
 
Another Ahab

Another Ahab

Well-known member
18,003
4,565
113
Location
Alexandria, VA
rustystud said:
It's kinda of funny. I went into tanks because one, there cool and two I thought if I ever had to go into combat I would be safe inside it ! Then in the first day of orientation I'm told I have a life expectancy of 5 minutes in combat ! That every little Tom, Dick and Harry with a "RPG" can take out my tank !
Click to expand...
Just a guess, rustystud, but:

- At Tank School, did they train you all to get a whole LOT done in just 5 minutes!?
 
rustystud

rustystud

Well-known member
9,284
2,996
113
Location
Woodinville, Washington
Another Ahab said:
Just a guess, rustystud, but:

- At Tank School, did they train you all to get a whole LOT done in just 5 minutes!?
Click to expand...
Actually the U.S. military has the fastest "Target Acquisition" and "One Round One Kill" ratio then any other country in the world. We can acquire the target and shot it dead in under 1 minute. All this while maintaining speeds of up to 30mph. We drilled that constantly. "Desert Storm" and all the others following proved it. Even now after 37 years I can still do the drills in my head.
 
Last edited:
OilfieldRoughneck

OilfieldRoughneck

Member
582
7
18
Location
Dubois, Wyoming
Quadjeeper, I like the build. And reading the comments here it seems to distract from the point of this thread. To document your build. I like yours so much I am thinking of doing something similar.
 
QUADJEEPER

QUADJEEPER

Member
Steel Soldiers Supporter
797
6
18
Location
Winter Springs, FL
OilfieldRoughneck said:
Quadjeeper, I like the build. And reading the comments here it seems to distract from the point of this thread. To document your build. I like yours so much I am thinking of doing something similar.
Click to expand...
Thanks Oilfield. Yes, some think what they consider normal/good for them should be how it is for all. I have never said my idea's are right or correct. It's just how I am building my rig. I try to respect others and their ideas, and I'd appreciate the same. Constructive criticism is fine, but to harp on things is another. Thanks for your and others input.
 
QUADJEEPER

QUADJEEPER

Member
Steel Soldiers Supporter
797
6
18
Location
Winter Springs, FL
Finished the bolt removal and scraped and vacuumed the rust up. Did the Oshpo treatment late this am, was dry early this afternoon. So figured my battery cutout space on some plywood and transferred the measurements to the floor. Cut out the floor and one crossmember so far, need to remove one more tomorrow. Since there is no real crossmember on the front of the box, will add a piece of angle iron for reinforcement. The space will allow 8 batteries to be installed. Can install one more on each side in front of the mud guard if need be. Will have a removable section of floor to access the batteries. Compartment will be vented and floor/door insulated and weatherstipped.
 

Attachments

Mike929

Mike929

Member
820
22
18
Location
DFW, Tx
Those cross members are what is holding your box to the frame. (i.e., the reason the floor doesn't buckle and your box slump onto your tires.) Are you doing something to return the structure you removed?
 
Another Ahab

Another Ahab

Well-known member
18,003
4,565
113
Location
Alexandria, VA
QUADJEEPER said:
Finished the bolt removal and scraped and vacuumed the rust up. Did the Oshpo treatment late this am, was dry early this afternoon. So figured my battery cutout space on some plywood and transferred the measurements to the floor. Cut out the floor and one crossmember so far, need to remove one more tomorrow.
Click to expand...
The project looks great:

Sawzall? Circular saw?

Just being nosey, QUADJEEPER, but wondering how you made the cuts?
 
QUADJEEPER

QUADJEEPER

Member
Steel Soldiers Supporter
797
6
18
Location
Winter Springs, FL
Mike929 said:
Those cross members are what is holding your box to the frame. (i.e., the reason the floor doesn't buckle and your box slump onto your tires.) Are you doing something to return the structure you removed?
Click to expand...
Yes, that is what I stated in my last post, "Since there is no real crossmember on the front of the box, will add a piece of angle iron for reinforcement".
 
You must log in or register to reply here.
110,926members
165,351threads
2,326,671posts
1,604online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks