How to move mk48/16 RBU

[98G]

As new mk16. Here's what I'll have to work with:

M923A2
M989A1

Worst case, I'll have the scrapper come with a flatbed and I'll pull the winch and whatever else presents itself as desirable parts and wave bye at the rest of it. Ideally I'd like a way to safely transport it, either whole or disassembled.

Thanks

 

[Csm Davis]

Have them set it whole up on your trailer and then pull it home. Your doing all of this for a winch?

 

[Andy1234]

Step 1: Buy a pintle hitch assy (there's one on egay)
Step 2: Hook it to your truck, tow it home.

 

[wreckerman893]

What Andy said.

 

[98G]

Step 1: Buy a pintle hitch assy (there's one on egay)
Step 2: Hook it to your truck, tow it home.

Am I to get so lucky for the PLS hitch to be useable for this purpose?

 

[98G]

Have them set it whole up on your trailer and then pull it home. Your doing all of this for a winch?

it seemed like a good idea at the time....

Thanks, I hadn't checked dimensions to see if it would fit on the trailer. Impulse bid at the last moment of the auction...

 

[BBoomerBootCamp]

Soni was making , or had made a bolt on hitch to pull the trailer with. He might even have the one I made years back that he pulled my mk17 back to NM with, although you might be better getting one he built. Maybe Castle Bravo will chime in with something closer.

 

[DrillerSurplus]

As new mk16. Here's what I'll have to work with:

M923A2
M989A1

Worst case, I'll have the scrapper come with a flatbed and I'll pull the winch and whatever else presents itself as desirable parts and wave bye at the rest of it. Ideally I'd like a way to safely transport it, either whole or disassembled.

Thanks

I have one of the hitches designed for the MK48 trailers in Los Angeles that you could use & we could work something out in trade.