chief1983
Member
- 290
- 1
- 16
- Location
- Saint Charles, MO
How can you install a civvy 12v socket if the ashtray is bolted shut? And the ashtray itself makes a great storage area for a 12v socket Y adapter. So I have two 12v sockets in my truck now.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your CUCV today/lately - Part 2
- Thread starter Warthog
- Start date
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
Installed a new heater core, resealed the right rear hub, and installed a 16k B&W Hitch.
tim292stro
Well-known member
- 2,118
- 41
- 48
- Location
- S.F. Bay Area/California
Welcome 
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Here's a second to that motion:
- Welcome to you also, tonkasal, from up here in Virginia.
Assel
Member
- 197
- 7
- 16
- Location
- Germany Schwarzwald-Baar
welcome tonkasal
since we had lots of rain during the last days and dry roads and the end of the day (all the salt they spent on the little snow we had was washed away) I decided to wake my ´09 up. Took the truck to the gas station, got some diesel and a sip of 2stroke oil and then we went to buy some stuff (I still love how shocked the people here are when you arrive with a CUCV on 33´ MT´s at a parking lot. I drove for about 1 1/2 hours with 2 restarts (at the gas station and super-market) to make sure my batteries are charged.
but when I first started it (fired right up, perfect start) my GEN2 light wont go out until I gave the gas pedal a little slam...normally they go out by themselves in a few seconds... Is there a problem showing up? I will keep an eye on that...
since we had lots of rain during the last days and dry roads and the end of the day (all the salt they spent on the little snow we had was washed away) I decided to wake my ´09 up. Took the truck to the gas station, got some diesel and a sip of 2stroke oil and then we went to buy some stuff (I still love how shocked the people here are when you arrive with a CUCV on 33´ MT´s at a parking lot. I drove for about 1 1/2 hours with 2 restarts (at the gas station and super-market) to make sure my batteries are charged.
but when I first started it (fired right up, perfect start) my GEN2 light wont go out until I gave the gas pedal a little slam...normally they go out by themselves in a few seconds... Is there a problem showing up? I will keep an eye on that...
tim292stro
Well-known member
- 2,118
- 41
- 48
- Location
- S.F. Bay Area/California
My friend's parents are British and are always amazed at how large american vehicles are - seems most in Europe are used to small compacts and hot-hatches... A full-sized diesel Blazer is probably like an elephant on the road there
Check belt adjustment first.
Bought a bunch of stuff for my '09 - and it's about two weeks from its first major mechanic's visit. All fluids, filters, transmission hard line, new lift pump, speedo-cable, engine mounts, soft fuel hoses - don't need to do injector lines as of yet. I think that's it for this evolution.
I'd do it myself, but I can't argue with the quality of work my mechanic does and he'll do this while I'm taking my youngest to swim class - done by the time I'm out and showered
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
. Leaves my weekends for chasing electrical stuff and playing with kids.
Assel
Member
- 197
- 7
- 16
- Location
- Germany Schwarzwald-Baar
Well I think its actual size isn´t that unnormal compared to a BMW X5 or those GT series, VW Touareg or Porsche Cayenne ...I think its more the fact that its old,dirty, rugged ..and loudMy friend's parents are British and are always amazed at how large american vehicles are - seems most in Europe are used to small compacts and hot-hatches... A full-sized diesel Blazer is probably like an elephant on the road there
Check belt adjustment first.
but yeah small cars are normal here ...some people even call ford rangers "big american pickup trucks" .. I really need a lifted K3500 dually or something like that (wasn´t there a dually CUCV?) The belt thing: well I think my belts are actually a bit flappy, if adjustment wont help I have a new set here...hope they fit. but honestly, I have to say I´m more the "it still runs, dont touch it" type of person
(this does not include normal maintenance, that needs to be done)Since I own my CUCV it never saw a mechanics shop from inside, every repair/maintenance etc. was done at home by myself.
CUCVLOVER
Active member
- 2,352
- 9
- 38
- Location
- west Tennessee, just outside Milan
Welcome to the sickness i mean club
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That's important work (and I'm not even kidding here).
It can amaze you what you think is small and insignificant, but a kid will remember it their whole life long; just the tiniest things.
Playing with kids is important work!
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
Did you have to modify the hitch or truck any to get the hitch in there? Did the pintle hook braces that attach to the frame interfere?
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
Thanks for the welcome, i've been a steelsoldiers "viewer" for quite a while, but now that I'm doing more with my M1008, I'll be posting more.
My Gen2 light also comes on and off during idle, but goes out once the rpms are above 650.
My Gen2 light also comes on and off during idle, but goes out once the rpms are above 650.
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
Yes, you have to cut out the lower braces from both rear tow hooks to access the frames bolt holes if you want to use a bolt on hitch. You can always create a new brace with some 3/8's bar stock and attach it to the two bar and hitch to re-strengthen the lower supports.
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
Yes, you have to cut out the lower braces from both rear tow hooks to access the frames bolt holes if you want to use a bolt on hitch. You can always create a new brace with some 3/8's bar stock and attach it to the tow bar bolts and hitch bolts to re-strengthen the lower supports.
Added some pics from my phone.
Last edited:
gottaluvit
Well-known member
- 1,786
- 28
- 48
- Location
- Bethesda, OH (AKA: Flyover Country)
Ok. I see. Thank you for the info and pictures as well. Nice to know model number too. Did you just get that truck on a Govplanet auction? I saw a real sharp unit went a few months back and it was white and in GA.
cucvrus
Well-known member
- 11,473
- 10,433
- 113
- Location
- Jonestown Pennsylvania
I just put the same hitch on Mr Rusty. The diagonal pintle hitch braces do not interfere. But the bottom braces on the bumper will have to be eliminated or modified. It can easily be done with a torch, grinder and welder. I just did away with the underside brace. I don't think it will be air lifted or tied down on a transport in the near future. And if so I will secure it to the frame like every other vehicle gets tied down. Happy Holidays.
cucvrus
Well-known member
- 11,473
- 10,433
- 113
- Location
- Jonestown Pennsylvania
I think the little pieces of zinc flat bar with the holes in go on top of the frame flange. It helps distribute the weight better on the flange. Sort of spread it out in a way. I seen that they made the same hitch to fit Ford Dodge and General Motors heavy and light duty pick-ups. That is a one hitch fits all design. Works well. Double check me on the Zinc pieces.
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
Actually, there are zinc spacers on both sides "top and bottom". I just did them the way the instructions laid them out.
tonkasal
New member
- 23
- 0
- 0
- Location
- Atlanta / GA
I got this one from a family member in California and had it shipped to GA. I will paint it back to original CARC green and add the MT markings.
amgeneral72
Active member
- 487
- 124
- 43
- Location
- HOLLY SPRINGS GA
Attachments
Last edited:
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA