I have been using my modified m35a2 for quite a few years now with good success. It was created with the help and parts supplied by members of this site. I am wanting to upgrade the tires and/or tires and rims on this truck with something that offers better weight handling capacity and better ground clearance than the current 9.00-20s. I have been reading the many ,many threads on this site about the multitude of possibilities, but have concerns about the way I am using this truck compared to how others are using theirs. So I am asking what you think would be the best setup for this truck and for its uses. It started out as a m35a2 cargo truck with turbo it then had a transfer case mounted pto install the frame extended 4 feet and a early 70's Barko 80 log loader installed. For the past 5 or so years it has been used as a log forwarder and for clearing up tree's ,brush and stumps on job site's. It is never used as an on road haul truck. It is driven from site to site and is registered as special use commercial as a crane carrier. I am planning on raising the bed height by 6 inches to give more tire clearance. I really do not want to flip the hubs and narrow the stance of the truck. Your information would be deeply appreciated.
Thanking you in advance.
