• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

LMTV brake valve leaking when pedal is depressed?

scottmandu

Active member
822
36
28
Location
Texas
I tried to get the truck inspected and they wouldn't pass it due to an air leak when the brake pedal is depressed. I've tracked it down to one of the valves (the right one if sitting in the drivers seat) that has 3 air hoses going to it above the rear axle. Odd thing is that both of my LMTV's has this air discharge when the brake pedal is depressed. It looks like it might release air under normal operation but I'm not terribly sure.

The part looks to have some sort of vent cap on it. It is a Haldex brake protection air valve.

NSN: 2530-01-360-4446
Part Number: N-50012

brake valve circle.jpg
 

NDT

Well-known member
Steel Soldiers Supporter
10,458
6,530
113
Location
Camp Wood/LC, TX
If you ever had to drive down a mountain grade in an air brake truck, it would be clear to you why you would not want your air to be pizzing away when you apply the brakes. Follow the diagnostic tree in the TM and replace the defective part(s), which it sounds like you have already identified.
 

Ue413

Member
205
2
16
Location
Springfield, Missouri
Mine does the same thing.....and although I took that valve apart, still haven't found the source. Regardless, can you identify the source for your valve once you replace?
 

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,400
4,182
113
Location
Brentwood, Calif
Been there done that...napa has a rebuild kit for 27.00
mine did the same thing...total time to remove, rebuild and install is about an hour.
the diaphragms go bad...mine fell to pieces when I opened it up.
need to get the part number when I get to the shop...
 

scottmandu

Active member
822
36
28
Location
Texas
Yup figured it out. It was the tractor protection valve, cost me all of about $140 installed to fix. I kept my valve and took it apart and it was filled with sand.. Oh joy I wonder what else could have sand in it!?
 
Last edited:

Retiredwarhorses

Well-known member
Steel Soldiers Supporter
4,400
4,182
113
Location
Brentwood, Calif
Yup figured it out. It was the tractor protection valve, cost me all of ab out $140 installed to fix. I kept my valve and took it apart and it was filled with sand.. Oh joy I wonder what else could have sand in it!?

Figured it out? we told you what part to replace...LOL
its amazing how simple some fixes can be..that's an easy one...the part replacement that is...
 

scottmandu

Active member
822
36
28
Location
Texas
Figured it out? we told you what part to replace...LOL
its amazing how simple some fixes can be..that's an easy one...the part replacement that is...
Yup figured it out about 10 minutes after I made the original post. I just found it odd that both trucks did the same thing so I guess it's a common failure or I'm just that lucky (not).
 

kenet3621

Member
179
4
18
Location
Blythewood SC
Here is the old diaphragm that was in the TPV (Tractor Protection Valve). Easy to see it was totally wasted...

TPV bad diaphragm (1).jpg

New one installed in less than 10 minutes. Press the brake pedal and no pressure lose in front or rear air systems! Back on the road.

Thanks to Andyrv6av8r!
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks