dmark4u
New member
- 13
- 1
- 0
- Location
- Ontario,Canada
M1101 tongue modification and height adjustable and LINE-X
Hello everyone I ran into a problem I'm sure many of you had before. My M1101 was way too high for my truck and I didn't want one of those large plate receivers so I basically removed the entire pintle and surge break setup and welded on an adjustable height mounting hitch that can accept pintle or ball. I have attached some pictures as well.
Parts cost me $80 and I did the welding myself.
![009 (2).jpg 009 (2).jpg](https://www.steelsoldiers.com/data/attachments/384/384301-dcccdc396f617759a547549bdb4d3a22.jpg)
![005.jpg 005.jpg](https://www.steelsoldiers.com/data/attachments/384/384302-99c5a1f38fd7ac8e4751247cb29f5cfb.jpg)
![004.jpg 004.jpg](https://www.steelsoldiers.com/data/attachments/384/384303-722e63f70420120a3aca2a6bb83eff5c.jpg)
Hello everyone I ran into a problem I'm sure many of you had before. My M1101 was way too high for my truck and I didn't want one of those large plate receivers so I basically removed the entire pintle and surge break setup and welded on an adjustable height mounting hitch that can accept pintle or ball. I have attached some pictures as well.
Parts cost me $80 and I did the welding myself.
![009 (2).jpg 009 (2).jpg](https://www.steelsoldiers.com/data/attachments/384/384301-dcccdc396f617759a547549bdb4d3a22.jpg)
![005.jpg 005.jpg](https://www.steelsoldiers.com/data/attachments/384/384302-99c5a1f38fd7ac8e4751247cb29f5cfb.jpg)
![004.jpg 004.jpg](https://www.steelsoldiers.com/data/attachments/384/384303-722e63f70420120a3aca2a6bb83eff5c.jpg)
Last edited: