rustystud
Well-known member
- 9,184
- 2,760
- 113
- Location
- Woodinville, Washington
![001.jpg 001.jpg](https://www.steelsoldiers.com/data/attachments/414/414369-e2b979844d5fddce0e5946322310f5a6.jpg)
![004.jpg 004.jpg](https://www.steelsoldiers.com/data/attachments/414/414370-608b431b31b8a5c5f79140c03a1df8c1.jpg)
![006.jpg 006.jpg](https://www.steelsoldiers.com/data/attachments/414/414371-44ff4c376acffcee46df8d5677711914.jpg)
![009.jpg 009.jpg](https://www.steelsoldiers.com/data/attachments/414/414372-c8dc67264b9b1818fbaaa9deaf8bdc48.jpg)
![010.jpg 010.jpg](https://www.steelsoldiers.com/data/attachments/414/414373-3dc767d865630eaefb271ffcce29fb1e.jpg)
![017.jpg 017.jpg](https://www.steelsoldiers.com/data/attachments/414/414374-1f5bc60727e21f15f485a135e6086262.jpg)
Here's some pictures of my Winch and Bumper Project. I had the inner sections formed at a machine shop and then cut out some 1/4" plate for the side reinforcements. The bolts are 1/2" grade 8 fine thread Frame (Flanged) bolts with Flanged Stover (locking) nuts, and 5/8" grade 8 fine thread Frame (flanged) bolts with Flanged Stover (locking) nuts. I used 34ea. 1/2" bolts and 16ea. 5/8" bolts on the frame extensions themselves.