• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

What have you done to your 5 ton this week?

Amer-team

Well-known member
1,707
32
48
Location
Centralia/WA
Scrapped paint, adjusted hood so that it can be opened without so much effort. it was a little too close to the cowl. Pondered on replacement of rt. front inner axle seal. Can hardly wait. And have been studying on the CTIS to figure out why rt. rear tire, keeps running out of air. Yes I have 5 lights flashing so need to figure out where it is going.
 

srodocker

Well-known member
6,549
69
48
Location
Lacey, Washington
Scrapped paint, adjusted hood so that it can be opened without so much effort. it was a little too close to the cowl. Pondered on replacement of rt. front inner axle seal. Can hardly wait. And have been studying on the CTIS to figure out why rt. rear tire, keeps running out of air. Yes I have 5 lights flashing so need to figure out where it is going.
The joy of CTIS Peter.
 

EO2NMCB

Member
643
23
18
Location
DeSoto, MO
Replaced all the rubber fuel lines and o rings on selector valve on the 816, WOW what a difference, fires right up now. Now to chase down the starter gremlins.
 

WV New Guy

Member
185
1
18
Location
Berkeley Springs WV
Not me but had some help

Well since my arms in a brace sine surgery on March 8th and I missed Rausch Creek being laid up others have been helping me.
1st Andyrv6av8r sent me new valve stems for my CTIS valves had a flat tire awesome help form SC
2nd Wife installed stems and aired up all tires to correct pressures with help from neighbor also named Andy.
3rd Andy the neighbor pressure washed entire truck top to bottom today wife is at work.

wife did take me for a ride as I was in serious withdraw yesterday

truck looks great much better with all 6 wheels down
 
Last edited:

gottaluvit

Well-known member
Well since my arms in a brace sine surgery on March 8th and I missed Rausch Creek being laid up others have been helping me.
1st Andyrv6av8r sent me new valve stems for my CTIS valves had a flat tire awesome help form SC
2nd Wife installed stems and aired up all tires to correct pressures with help from neighbor also named Andy.
3rd Andy the neighbor pressure washed entire truck top to bottom today wife is at work.

wife did take me for a ride as I was in serious withdraw yesterday

truck looks great much better with all 6 wheels down
So what was your 1st wife doing while the 2nd wife was installing stems and airing up the tires? Ha ha!
 

WV New Guy

Member
185
1
18
Location
Berkeley Springs WV
Good one no only one but she is the 2nd thank god she found me ! And loves driving the 5 ton makes all the local gasser 4x4 boys jealous when she shows up. Plus it helps she drives an Oshkosh T-3000 and Striker 3000 for a living.
 

machinist75

Member
777
7
18
Location
Murphy, TEXAS
Installed my mrap mirrors, fender antenna mount, and my bedside antenna mount with offset bracket. I sell the offset antenna mount kit in the classifieds if anyone is interested. Went to car show and took home first place out of three in the military class. It was a good day.
 

Attachments

AMGeneral

Well-known member
2,301
115
63
Location
Connelly Springs, NC
I used my M62A1 and M103 genset trailer(converted to haul my air compressor,welder, and tool box) to remove,clean, and re seal the final drive on a John Deere 450 AA track loader/backhoe combo.

It would be difficult to do without a wrecker anymore.

Pictures!
 

Attachments

Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks