islandtackler
New member
- 3
- 0
- 1
- Location
- Carolina Beach, NC
Does anybody have a picture of a M38 in the back of a 5-ton??? I am thinking about adding an M38 to the collection and would like to see this.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Picture of Willy's jeep in the bed of a 5-ton
- Thread starter islandtackler
- Start date
- 3,871
- 497
- 83
- Location
- Gray Court SC
- 5,368
- 3,378
- 113
- Location
- Lexington, South Carolina
Don't have a picture, but my 93 Corolla rode home from Atlanta in an M-36 I purchased there several years ago. Jeep is smaller, so it should fit just fine.
- 3,871
- 497
- 83
- Location
- Gray Court SC
- 302
- 2
- 16
- Location
- Loxahatchee, Fl
M151 in a M35
Attachments
dmetalmiki
Well-known member
- 5,523
- 2,028
- 113
- Location
- London England
- 1,180
- 163
- 63
- Location
- Marietta, Georgia
Dumpster hauls his M38 in the bed of the M51.
- 623
- 53
- 28
- Location
- Attleboro, MA
Not a 5t, but it fits fine in a Deuce!
We have 10 foot c-channel ramps with lip and a lock to set in between the tail gate! 11'6" might make it a bit less steep, but they work, it's a bit un-nerving, and the line up is critical and they are heavy! This last weekend we bought two steel 3 wheel little dollies to slide them! Big difference, much easier! Now just have to had some handles to the ramps and we are golden!
We have 10 foot c-channel ramps with lip and a lock to set in between the tail gate! 11'6" might make it a bit less steep, but they work, it's a bit un-nerving, and the line up is critical and they are heavy! This last weekend we bought two steel 3 wheel little dollies to slide them! Big difference, much easier! Now just have to had some handles to the ramps and we are golden!
gparkes
New member
- 6
- 1
- 3
- Location
- O'Fallon, MO
I have a Kia Soul that I would love to haul in the back of my truck. My fear is the ramps would weigh more than the car, which means that it would have been easier to lift the car in the back of my M923A2 than to lift the ramps.
I am being sarcastic of course, but I am very curious on cost of the c-channel ramps. I would like my ramps to be at least 13'.
I am being sarcastic of course, but I am very curious on cost of the c-channel ramps. I would like my ramps to be at least 13'.
- 623
- 53
- 28
- Location
- Attleboro, MA
Mine are 10' from a fellow MV member who knew about them after I put out a request for ramps! Only $50, and yes they are heavy, but at 63 I can still manage to lift one end and drag them into place! 
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
Show off. Real nice though as I saw it at the Denton show.
Rmtaunton
Well-known member
- 1,510
- 31
- 48
- Location
- Smyrna, ga
Ford Mechanic
Active member
- 1,805
- 6
- 38
- Location
- Edenton, NC
Yeah, works great until you blow a hydro hose with it in the back!
We're just all jealous Ken!