• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Deuce tailights

MWMULES

Well-known member
Steel Soldiers Supporter
In Memorial
5,580
349
83
Location
DESOTO, KANSAS
There are the old school tail or turn sig lights, FD's used to cut out the front and glue is a reflector lens to make a full face light, pre Gamma Goat lens. My M211 came with them.
000_0342.jpg 000_0343.jpg
 

Kaiser67M715

Member
699
26
18
Location
NH
There are the old school tail or turn sig lights, FD's used to cut out the front and glue is a reflector lens to make a full face light, pre Gamma Goat lens. My M211 came with them
This, I found a few articles where the older cats eye lens were cut out, and a lens inserted for more light- it removes the function of black out lights, but certainly made the lights more visible for us civilians.



Sent from my iPhone using Tapatalk
 

rosco

Active member
Steel Soldiers Supporter
2,102
30
38
Location
Delta Junction, Alaska
Back in the '60s & '70s, the surplused MVs used the so-called cateyes. Like my M37 & M211/135s. Also many others. They had a durable cast aluminum housing that was water proof/vibration proof, with BO/cat-eye lens. The cops didn't like them much because the cat-eye was pretty small. Somewhere much more recently a plastic aftermarket full lens became available that lends itself well to roadwork, but not much else, unless they are mounted in a well protected spot.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks