- 3,801
- 2,829
- 113
- Location
- Peoria, Illinois
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
opcorn:-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Project time again at Zouts
- Thread starter zout
- Start date
opcorn:
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Ahab - for outline of the pattern - 3M green thin line tape used - yellow tape is just for laying on top of the thin like to reduce thickness of paint - then green masking paper.
ANYHOW - Doc brought pics to Golden Corral this morning of how he first got it RAN BEFORE PARKED senario - just to show the progression of work that has been put into the rare M170. I took pictures of the pictures just to show the audience.
When you watch Iron Resurection on the Velocity Channel on tv - we love this **** in this condition.
Here ya go and grab a beer to review.
OH YEAH Babybear came over today to hand out with Molly - had a great time with everyone that dropped by today - really miss these times.
ANYHOW - Doc brought pics to Golden Corral this morning of how he first got it RAN BEFORE PARKED senario - just to show the progression of work that has been put into the rare M170. I took pictures of the pictures just to show the audience.
When you watch Iron Resurection on the Velocity Channel on tv - we love this **** in this condition.
Here ya go and grab a beer to review.
OH YEAH Babybear came over today to hand out with Molly - had a great time with everyone that dropped by today - really miss these times.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
That takes real guts to see a vehicle worth restoring in that picture. My hat goes off to you. You are fearless.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
It was a good time today Uncle Dave. When I finally took BabyBear home he flopped on his bed and passed out!!
- 3,923
- 76
- 48
- Location
- Comfort, Texas
One has to have good vision and big balls and plenty of money to take on a restoration of that magnitude.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Gee mine's not as bad as I thought.
papabear
GA Mafia Imperial 1SG
- 13,520
- 2,464
- 113
- Location
- Columbus, Georgia
- 3,923
- 76
- 48
- Location
- Comfort, Texas
I knew there had to be others out there.
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Of course I cannot speak to the size of the chesnuts!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Trade secret of magic.
No matter what condition it is in...you have to already envision already done.
Now spend the labor and save on parts whenever you can.
JUST GET ER DONE.
No matter what condition it is in...you have to already envision already done.
Now spend the labor and save on parts whenever you can.
JUST GET ER DONE.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
- 7,744
- 154
- 63
- Location
- Columbus Georgia
OK OK OK - here are some updated pics.
Driveline in ---- started wiring in ign system - hand painted on stenciling done with outline graphics from Knowmoralitygraphix - send me a PM if you need their info. Owner is Greg.
hand fabbing the passenger lower seat.
Passenger side upper stretcher rails getting made and then have to fab up the stretcher handle latches
Driveline in ---- started wiring in ign system - hand painted on stenciling done with outline graphics from Knowmoralitygraphix - send me a PM if you need their info. Owner is Greg.
hand fabbing the passenger lower seat.
Passenger side upper stretcher rails getting made and then have to fab up the stretcher handle latches
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
So the stencils are by self-adhesive transfer, or do do you paint "through" the templates?
I'm not picturing how those templates work (they look solid where the lettering is, so how do you get the paint "through" that to the surface?
Last edited:
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Sweet as always. Great detail work.
jasonjc
Well-known member
- 5,326
- 289
- 83
- Location
- Gravette Ar.
Any more info pic's on :
"hand fabbing the passenger lower seat.
Passenger side upper stretcher rails getting made and then have to fab up the stretcher handle latches"
"hand fabbing the passenger lower seat.
Passenger side upper stretcher rails getting made and then have to fab up the stretcher handle latches"
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Commander Warp uses his patented "FM" fabrication techniques Served the purpose over many years.
- 3,801
- 2,829
- 113
- Location
- Peoria, Illinois
Man, that's some good stuff there! Thanks for sharing...................liking the new shop and A.O.? Pics are greatly appreciated!
- 7,744
- 154
- 63
- Location
- Columbus Georgia
Stencil is on transfer paper that tacks to the surface with lettering already cut out. Hand paint them because 1954 DID NOT have vinyl lettering that looked perfect. Then peel off the transfer paper after painting.
Seat frame .... more pic's to come but will not be posting measurements...I will although show the only thing I have to go by to get them done.
Seat frame .... more pic's to come but will not be posting measurements...I will although show the only thing I have to go by to get them done.
beanman1
New member
- 324
- 1
- 0
- Location
- in the south
Dang that will cost you giving away TRADE SECRETS
opcorn: