gimpyrobb
dumpsterlandingfromorbit!
- 27,785
- 749
- 113
- Location
- Cincy Ohio
So I've had a couple of push/pull mig units for a while. Now that I have an Al flat bed on my pickup, I'd like to add stake pockets and a rub rail to the sides. Of course, that comes after I weld on the rear C channel cause I shortened the bed a tad. Here is a couple pics of my first Al welds, I know - no big deal, but its exciting learning a new process! If anyone has any old Cobramatic stuff laying around, I'd be interested in it!
![20160906_185946.jpg 20160906_185946.jpg](https://www.steelsoldiers.com/data/attachments/438/438670-e9c71ad5daafaa1a9cccd812adb44454.jpg)
![20160906_184140.jpg 20160906_184140.jpg](https://www.steelsoldiers.com/data/attachments/438/438671-3b4d624e7f7a085aa9627e9229f0b542.jpg)
![20160906_185741.jpg 20160906_185741.jpg](https://www.steelsoldiers.com/data/attachments/438/438672-75060f36157d422a28ef0e67f1350cb4.jpg)
![20160906_185946.jpg 20160906_185946.jpg](https://www.steelsoldiers.com/data/attachments/438/438670-e9c71ad5daafaa1a9cccd812adb44454.jpg)
![20160906_184140.jpg 20160906_184140.jpg](https://www.steelsoldiers.com/data/attachments/438/438671-3b4d624e7f7a085aa9627e9229f0b542.jpg)
![20160906_185741.jpg 20160906_185741.jpg](https://www.steelsoldiers.com/data/attachments/438/438672-75060f36157d422a28ef0e67f1350cb4.jpg)