combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
That little beauty would solve all my problems, save me a lot of MacGyver splicing!
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
I have joined the Goat herd
- Thread starter combat32
- Start date
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Bilge pump installed today, and repositioned the buss bar. Lots of little stuff wiring and such, couple more little things to do before I stab the motor back in, hopefully Wednesday.
- 2,118
- 67
- 48
- Location
- Maine USA
Check the clutch arm to make sure that clip is in place, also give the clutch and bearing a good inspection, now is the time, the voice of experience speaks. Also you may want to replace the coolant hoses around the water pump, mine were all rotten, they were hard enough with the engine out.
- 2,118
- 67
- 48
- Location
- Maine USA
Shipped the harness and relay today priority mail, should have it by weekend.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Thanks buddy, I think I owe you now.
- 2,118
- 67
- 48
- Location
- Maine USA
The only thing you owe me is to get that thing running, oh and a few more pictures would be nice.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
I'll get some more pics up, I put a new clip in after your woes, mine was broke as well, clutch and bearing look good so I went with it.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Box of gold arrived from Maine!
It's most of the wiring harness from engine back to the dash.
It's most of the wiring harness from engine back to the dash.
Attachments
- 2,118
- 67
- 48
- Location
- Maine USA
Hope it helps you out, not sure what that white wire was.
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Motor back in the truck today!
Attachments
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
What a beautiful transmission
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
I thought so too! Thanks again Mark!
Everyone ought to reinstall those rear motor/transmission mounts at least once, what a booger, much cursing involved.
Every time I work on this truck I gain more respect for the wheel mechanics that used to work on them.
Everyone ought to reinstall those rear motor/transmission mounts at least once, what a booger, much cursing involved.
Every time I work on this truck I gain more respect for the wheel mechanics that used to work on them.
- 2,118
- 67
- 48
- Location
- Maine USA
Good Job Tom, I did the mounts twice, they were lots of fun! 
Last edited:
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Got the back of my truck organized a little better, the pile of parts that was in the back is getting smaller as I put her back together.
Attachments
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
Test fit for the new hood, this is the one off the parts truck. It really changes the look of the truck as I originally had the steel hood.
I didn't really attach it permenantly as it will have to come back off for paint.
I didn't really attach it permenantly as it will have to come back off for paint.
Attachments
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
I don't know if the fit IS good, but it sure looks plenty good.
How did it all line up?
How did it all line up?
combat32
Well-known member
- 1,639
- 106
- 63
- Location
- Booneville AR.
After I beat the heck out of it, lines up pretty good.
Another Ahab
Well-known member
- 17,999
- 4,556
- 113
- Location
- Alexandria, VA
Last edited:
- 2,118
- 67
- 48
- Location
- Maine USA
Looks nice Tom, I prefer the aluminum cover as well, it just matches the shape of the truck better.
- 805
- 71
- 28
- Location
- Kennewick, WA
Yes, I also agree. The aluminum cover is the better look. And yours still has handles. Mine have been cut flush. Next time your out there with a caliper would you measure the O.D. of the handle tubing?
Sent from my Galaxy Nexus using Tapatalk
Sent from my Galaxy Nexus using Tapatalk