- 14,607
- 4,695
- 113
- Location
- Buchanan, GA
I bought this trailer from Adam a year or so ago. He was able to bring it over to me Friday night. So my plan is to paint and replace the deck. As well as new tires. And figure out a ramp setup. It'll be used to haul the HMMWV and M114 mainly. But I think other trucks could be in the future.
Anyhow, here's a few pics this far. My middle son wanted to help with it. We've managed to pull off most of the plywood. And knocked out the soft boards. I've also cut/ground the screws that were bent. Tomorrow I'll be picking up a T40 impact bit to try to get the rest out of the solid boards.
Planning on going with white oak for the deck. I've also thought about adding some lengthwise channel down the middle and diamond plate. To cut down on the lumber and allow for a place for a cable to pass over. I've thought about adding a winch to it as well.
![uploadfromtaptalk1479083567390.jpg uploadfromtaptalk1479083567390.jpg](https://www.steelsoldiers.com/data/attachments/446/446848-d3b608203e48f101902ce8fd1c24924b.jpg)
![uploadfromtaptalk1479083574936.jpg uploadfromtaptalk1479083574936.jpg](https://www.steelsoldiers.com/data/attachments/446/446849-cf388ad146c658541f170d92d7b86b8e.jpg)
![uploadfromtaptalk1479083583915.jpg uploadfromtaptalk1479083583915.jpg](https://www.steelsoldiers.com/data/attachments/446/446850-ea217e8ea9b2c9bdbd4db87686c3fb10.jpg)
![uploadfromtaptalk1479083593996.jpg uploadfromtaptalk1479083593996.jpg](https://www.steelsoldiers.com/data/attachments/446/446851-f3f55c475bb5c3f20d74b1769bde9134.jpg)
Anyhow, here's a few pics this far. My middle son wanted to help with it. We've managed to pull off most of the plywood. And knocked out the soft boards. I've also cut/ground the screws that were bent. Tomorrow I'll be picking up a T40 impact bit to try to get the rest out of the solid boards.
Planning on going with white oak for the deck. I've also thought about adding some lengthwise channel down the middle and diamond plate. To cut down on the lumber and allow for a place for a cable to pass over. I've thought about adding a winch to it as well.
![uploadfromtaptalk1479083567390.jpg uploadfromtaptalk1479083567390.jpg](https://www.steelsoldiers.com/data/attachments/446/446848-d3b608203e48f101902ce8fd1c24924b.jpg)
![uploadfromtaptalk1479083574936.jpg uploadfromtaptalk1479083574936.jpg](https://www.steelsoldiers.com/data/attachments/446/446849-cf388ad146c658541f170d92d7b86b8e.jpg)
![uploadfromtaptalk1479083583915.jpg uploadfromtaptalk1479083583915.jpg](https://www.steelsoldiers.com/data/attachments/446/446850-ea217e8ea9b2c9bdbd4db87686c3fb10.jpg)
![uploadfromtaptalk1479083593996.jpg uploadfromtaptalk1479083593996.jpg](https://www.steelsoldiers.com/data/attachments/446/446851-f3f55c475bb5c3f20d74b1769bde9134.jpg)