cfish
New member
- 173
- 0
- 0
- Location
- Eastern/NC
Where is the best place to mount a jerry can in the m1009? Would it be best inside the back on the raised mount? Or outside ?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
mounting jerry can m1009
- Thread starter cfish
- Start date
- 7,058
- 148
- 63
- Location
- Mid Hudson Valley NY
What does the TM say???
cfish
New member
- 173
- 0
- 0
- Location
- Eastern/NC
I don't know. I guess I'll have to check. Just curious if others have found better places.
- 1,918
- 19
- 38
- Location
- Bradenton, FL
Try this.....
Attachments
mistaken1
New member
- 1,467
- 6
- 0
- Location
- Kansas City, KS
I vote for inside on the mount.
cfish
New member
- 173
- 0
- 0
- Location
- Eastern/NC
Roger that!! Thats where I knew it went was just curious if others mounted it other places. I will stick with the inside!
southdave
Active member
- 1,986
- 6
- 38
- Location
- ripley, oh/TDY Lordstown,Oh
roof rack on top
- 913
- 179
- 43
- Location
- Las Vegas Nevada
water jerry cans inside the truck....... fuel jerry cans outside the truck
MudderMilitia
New member
- 59
- 1
- 0
- Location
- Elk Grove Village, Illinois
Where did you get that rubber mat? Is it just a truck bed mat that you cut to fit?
I have my jerry can mounted in the back but for the life of me cant figure out how that hold down strap is supposed to mount! I saw a M1008 the other day at Menards that had dual can mounts on the front brush guard. Seemed like a bad idea (rearend collision eek!)
kvitt
New member
- 44
- 0
- 0
- Location
- Louisville, Kentucky
i am going to extend one of the rear pull/loading shackles with a peice of tube, then mount the can on the top of the extension..the bad thing is i will have to take the can off the bracket to open the rear gate on the 1009
richingalveston
Well-known member
- 1,715
- 120
- 63
- Location
- galveston/Texas
heres one on my doner vehicle, it has a swing out spare tire holder with jery can mount, i am not going to use it if anyone needs it
Attachments
- 2,520
- 18
- 38
- Location
- San Angelo, Tx USA Planet Earth
Yeah, but what if you no longer have that mount?
View attachment 221052
And yah, me too. I wanna know where you got that mat. That would work great.
View attachment 221052
And yah, me too. I wanna know where you got that mat. That would work great.
Last edited:
Armada
New member
- 3,046
- 4
- 0
- Location
- Buick City, MI
Another inside mount.
Hey rich, I've been looking for one of those swing out carriers. I would be interested in it.
Attachments
TCUCV
New member
- 213
- 0
- 0
- Location
- Chocowinity, NC
Does anyone have an ideal location for the M1008?
tamecrow
Member
- 121
- 0
- 16
- Location
- Nova Scotia
I like this setup.
Attachments
Darwin T
Active member
- 1,185
- 10
- 38
- Location
- Port Arthur, Texas
i don't know about CUCV's but on a deuce the two fuel cans on the front should give the people who like to move infront of me and hit the brakes something to think about. 
Ando427
New member
- 25
- 1
- 0
- Location
- San Diego, Ca
Does anyone know where I could find one of those mounts for the inside cargo area? My 1009 didn't have it in there when I bought it.
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
EBAY. I seen them on EBAY today.
NovacaineFix
Member
- 662
- 1
- 18
- Location
- San Diego, California
As far as I know, it is the same as the ones for the 5-tons and Deuces. My 5 ton Jerry can holder is exactly the same as my 1009. the 4 bolts on the bottom of the holder should line up with the 4 nuts on the floor bracket, unless you are talking about the floor bracket, mine is welded in.
cucvrus
Well-known member
- 11,474
- 10,441
- 113
- Location
- Jonestown Pennsylvania
And if you are talking about the hump mount that was welded on the left rear floor of the M1009. I have a few of them that I surgically removed. Excellent condition.