- 1,180
- 163
- 63
- Location
- Marietta, Georgia
Guys, before i just set this think on fire, thought I would seek some sage advice.
A few weeks ago the IP just died, broke dead. Found parts some new some not (many thanks Gimp), got the little animal back together, bled injectors, and she runs.
Runs really good, no skip, no smoke, makes good power, easily pulls past 100% load, no flicker, great.
But...
Turn it off for more than about 15 minutes and will not re-start. Not even trying, no smoke, nothing. Bleed one injector and she starts and runs wonderfully.
Fuel pumps sound fine, prime for a few seconds, and they settle into a slow pulse.
Any thoughts?
A few weeks ago the IP just died, broke dead. Found parts some new some not (many thanks Gimp), got the little animal back together, bled injectors, and she runs.
Runs really good, no skip, no smoke, makes good power, easily pulls past 100% load, no flicker, great.
But...
Turn it off for more than about 15 minutes and will not re-start. Not even trying, no smoke, nothing. Bleed one injector and she starts and runs wonderfully.
Fuel pumps sound fine, prime for a few seconds, and they settle into a slow pulse.
Any thoughts?