Mep003 gages dont work

[Csm Davis]

None of the gages on my 003 work at all, need a little guidance on where to start.

Sent from my SM-G930V using Tapatalk

 

[jamawieb]

Take a meter and see if you get a reading on the connectors of the voltage gauge to make sure the generator is producing power. No output, no readings.

 

[csheath]

Yep, make sure you have output at the lugs and go from there. If it has output then the gauges are bad.

If they are the same as the gauges on an 803 they CAN be taken apart and cleaned out but they won't be accurate. Order some inexpensive digital meters and convert it to something usable.

 

[doghead]

Is the control panel connected?

 

[Csm Davis]

Is the control panel connected?

I believe so, the panel lights work.

Sent from my SM-G930V using Tapatalk