2 door to 4 door conversion question....

[tomelroy]

no c pillar needed for the amtech hard top

 

[Funky Doctor]

Can anyone tell me the size of the four C pillar mounting bolts?

 

[Action]

Can anyone tell me the size of the four C pillar mounting bolts?

The part number is B1821BH025C125N
Learning how to read those in the parts books will help out. Sometimes the size isn't given in the description.

 

[avlon01]

I made an Imgur album of all the figures in the instruction sheets.

http://imgur.com/a/RyrpS

 

[Sintorion]

Can anyone tell me the size of the four C pillar mounting bolts?

Which ones? I think I used 1" 3/8ths on top bolts and 1 1/2" 1/4 on the brace where it attaches the door catch loop.

 

[Funky Doctor]

I traced the part number supplied by Action and it came back as 1/4-20 X 1.25. That's for the C pillar attachment to the top of the wheel wells. Looks right based on the hole size. I will post confirmation that it works once I get the hardware and have it installed.

 

[juanprado]

Yes 1/4 coarse 1-1/4 or 1-1/2 length would be fine,the longer if you have the reinforcement plate underneath the fender

 

[Dogandknife]

I believe you are referencing the C-Pillar that the rear of the 4-Man top attaches too. I have about 4 extra I got in a trade a while back. I'm in Maryland so we would have to get a shipping quote and work out a price if you interested - Jesse

Jesse, do you have an extra C Pillar? I too am in Maryland. Thanks Paul

 

[Witchdoctor]

The details in this post were extremely helpful.