cybindustries
Member
- 47
- 4
- 8
- Location
- Tracy CA
Does anyone know the seal that fits the cab latch that's in the body on the latch side. Not the indicator side mine blew out.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Cab Latch seal
- Thread starter cybindustries
- Start date
- 6,861
- 696
- 113
- Location
- Stratford/Connecticut
Made by power packer. Some have had luck with generic replacements. I would try that first.
scottmandu
Active member
- 822
- 36
- 28
- Location
- Texas
I used Buna o-rings from a kit I had.
cybindustries
Member
- 47
- 4
- 8
- Location
- Tracy CA
The seals on the piston part are just regular o rings. The one that blew out on mine is the one in the actual body of the latch on the latch side. I have tried every o ring kit we have around the shop and nothing has worked yet. It is driving me nuts.
expeditionnw
Member
- 174
- 1
- 18
- Location
- Alaska
Small keyboard big fingers
I am surprised there isnt a kit out there for this. I thought the main plunger was a square cut o ring...
OP are you referring to one of these shaft seals?
I am surprised there isnt a kit out there for this. I thought the main plunger was a square cut o ring...
OP are you referring to one of these shaft seals?
Attachments
Last edited:
cybindustries
Member
- 47
- 4
- 8
- Location
- Tracy CA
That's them
expeditionnw
Member
- 174
- 1
- 18
- Location
- Alaska
any word on finding your seals? i am ready to drive into the hydraulic shop and see what they can do.
cybindustries
Member
- 47
- 4
- 8
- Location
- Tracy CA
I gave up and bought a NOS latch on fleebay
- 1,813
- 1,519
- 113
- Location
- Orlando, FL
Sorry that I didn't see this earlier. I was able to easily replace that inner (smaller) o-ring with a metric o-ring, on my M1078. I too had tried several of the english numbered o-rings, and none fit just right. I got a small metric o-ring kit and it had one that worked perfectly.
Hopefully this helps someone in the future, who might come across this post.
Hopefully this helps someone in the future, who might come across this post.
expeditionnw
Member
- 174
- 1
- 18
- Location
- Alaska
FWIW, I have invested some time to find the CORRECT seals/wipers for the cab latch and put together an overhaul kit which is available for purchase. These latches are very simple, and they can be resealed without removing them from the truck.
PM if interested, or see the ad in classifieds.
PM if interested, or see the ad in classifieds.
Adventure Driven
Member
- 321
- 14
- 18
- Location
- Montana