Alright folks, I've ran into a bit of a jam.
I had a no start HMMWV, ordered one of those KDS green label boxes. Works great. Now my buddy has the same issue, so we decided to pull apart the box he took out of the no start truck and see if we couldn't fix it.
The outside of the box has a silver label that says Prestolite Control Box. NSN 6110-01-395-9585. MFR 7E656
Inside the box is a small PCB with 2 transistors 3 FET's and a gaggle of diodes and resistors. Doesn't appear to be much in the way of logic on the board, i don't see any timer chips but I'm not much an electrical guy either. These are just my best wild ass guesses.
Also inside the box are 3 solenoids. 2 look like your typical ford firewall mount starter solenoid with plastic bodies, no markings on them what so ever. the 3rd {middle} solenoid is a regular metal canister type.
Upon inspection the left hand outside plastic relay {top relay in the picture} with the yellow wire coming off it is not clicking. I don't see anything obviously blown up on the PCB so i figure one of the relays is bad. I take the no click relay out of the box and drill out the rivets. To my surprise the relay is EMPTY. Nothing inside it!
Is this relay SUPPOSED to be a dummy relay? or did i just get a box thats been bad all along? This is the box was installed in the HMMWV when it was purchased from GP. Im a bit lost on where to go from here.....
Here are a few pics from inside the box. As configured, the relay that doesn't click and finally the relay that doesn't click opened up.
I had a no start HMMWV, ordered one of those KDS green label boxes. Works great. Now my buddy has the same issue, so we decided to pull apart the box he took out of the no start truck and see if we couldn't fix it.
The outside of the box has a silver label that says Prestolite Control Box. NSN 6110-01-395-9585. MFR 7E656
Inside the box is a small PCB with 2 transistors 3 FET's and a gaggle of diodes and resistors. Doesn't appear to be much in the way of logic on the board, i don't see any timer chips but I'm not much an electrical guy either. These are just my best wild ass guesses.
Also inside the box are 3 solenoids. 2 look like your typical ford firewall mount starter solenoid with plastic bodies, no markings on them what so ever. the 3rd {middle} solenoid is a regular metal canister type.
Upon inspection the left hand outside plastic relay {top relay in the picture} with the yellow wire coming off it is not clicking. I don't see anything obviously blown up on the PCB so i figure one of the relays is bad. I take the no click relay out of the box and drill out the rivets. To my surprise the relay is EMPTY. Nothing inside it!
Is this relay SUPPOSED to be a dummy relay? or did i just get a box thats been bad all along? This is the box was installed in the HMMWV when it was purchased from GP. Im a bit lost on where to go from here.....
Here are a few pics from inside the box. As configured, the relay that doesn't click and finally the relay that doesn't click opened up.