I was going to install my new vacuum adjustumator on the side of the injector pump. Lo and behold,when I get the throttle position sensor off, it has a blade on it instead of whatever would fit into the vacuum device.
I wrote down the numbers that I could see on the red tag. Is hard to read so they might not be perfectly correct. 13579684. And DVCD09345431.
I can't get pictures of the tag, but I took some of the offending spot and pump.
If you have any info on what pump this may be, or if there is an adapter I can use, it would be appreciated.
![IMAG0755[1].jpg IMAG0755[1].jpg](https://www.steelsoldiers.com/data/attachments/491/491257-c6202c1bc4fd76b1132b2ce7a0cbcd45.jpg)
![IMAG0765[2].jpg IMAG0765[2].jpg](https://www.steelsoldiers.com/data/attachments/491/491258-3fe578a039e6eb2e936b653621557284.jpg)
![IMAG0766[1].jpg IMAG0766[1].jpg](https://www.steelsoldiers.com/data/attachments/491/491259-cf52dbe0b6555ebeca9cfbee7f8f63de.jpg)
I wrote down the numbers that I could see on the red tag. Is hard to read so they might not be perfectly correct. 13579684. And DVCD09345431.
I can't get pictures of the tag, but I took some of the offending spot and pump.
If you have any info on what pump this may be, or if there is an adapter I can use, it would be appreciated.
![IMAG0755[1].jpg IMAG0755[1].jpg](https://www.steelsoldiers.com/data/attachments/491/491257-c6202c1bc4fd76b1132b2ce7a0cbcd45.jpg)
![IMAG0765[2].jpg IMAG0765[2].jpg](https://www.steelsoldiers.com/data/attachments/491/491258-3fe578a039e6eb2e936b653621557284.jpg)
![IMAG0766[1].jpg IMAG0766[1].jpg](https://www.steelsoldiers.com/data/attachments/491/491259-cf52dbe0b6555ebeca9cfbee7f8f63de.jpg)
Last edited: