Since my engine is the 6.2L I was trying to figure out how to get more air in the intake.
I have seen some you tube videos where the guy modified the inside of the air filter housing and intake where the pre-air cap sits
I also read that CFM in is about 360
Keep in mind that my days of running the Humvee with water over the hood are over, mostly city/highway and trail riding
I had a spare cap so I removed the mesh inside the pre-air cap, I felt that the mesh might cause a restriction
I also have on order a 4 inch diameter silicone collar that is 3 inch tall, to raise the cap from the hood
I should have all of the parts tomorrow and will be road testing this weekend
Has anyone else tried this
![IMG_2101.JPG IMG_2101.JPG](https://www.steelsoldiers.com/data/attachments/494/494470-39f07d11b81c310a4df92da81b32a7b7.jpg)
![IMG_2102.JPG IMG_2102.JPG](https://www.steelsoldiers.com/data/attachments/494/494471-bf5cfc57de5ab217bda72003b112af42.jpg)
I have seen some you tube videos where the guy modified the inside of the air filter housing and intake where the pre-air cap sits
I also read that CFM in is about 360
Keep in mind that my days of running the Humvee with water over the hood are over, mostly city/highway and trail riding
I had a spare cap so I removed the mesh inside the pre-air cap, I felt that the mesh might cause a restriction
I also have on order a 4 inch diameter silicone collar that is 3 inch tall, to raise the cap from the hood
I should have all of the parts tomorrow and will be road testing this weekend
Has anyone else tried this
![IMG_2101.JPG IMG_2101.JPG](https://www.steelsoldiers.com/data/attachments/494/494470-39f07d11b81c310a4df92da81b32a7b7.jpg)
![IMG_2102.JPG IMG_2102.JPG](https://www.steelsoldiers.com/data/attachments/494/494471-bf5cfc57de5ab217bda72003b112af42.jpg)