Eliteweapons
Member
- 238
- 5
- 18
- Location
- Baltimore Maryland
Keep in mind that the size of the air hose (line) supplying the impact is just as important as having a big enough compressor and tank. I have a 1/2 inch line that I use on my 3/4" gun.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Tools for working on the Deuce
- Thread starter sgms18
- Start date
- 241
- 85
- 28
- Location
- North Augusta SC
So, rustystuds comment on the HF earthquake xt impacts got me to looking at em online & alot of people have good things to say. The 3/4 pneumatic claims 1500ft lb & the 1/2 20 volt battery claims 1200. Does anybody here have 1st hand experience with either?
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
I do actually. I own several 3/4" impacts from "Chicago Pneumatic" (the made in America one) and "Snap-On" to the new Harbor Freight "Earthquake" . I really cannot tell any difference in performance between them. The only difference I can find is weight. The newer Earthquake is lighter then all the others. The heaviest one is the Snap-On.
I also own several 1" impacts and again the "Earthquake" is the lightest one.
Now I don't own any of the electric impacts except my "Milwaukee" ones. So I cannot help you there.
- 241
- 85
- 28
- Location
- North Augusta SC
Thanks for the response. I believe I'll be ordering that 3/4 Earthquake here directly.
The Dewalt 20v brushless 1/2" impact and the 18v Milwaukee fuel impact will do what an air impact can. At double the rate. Air impacts on these trucks are slow unless you add a few more tanks. I carry the dewalt gun with me on the road. It will take lugnuts off that a 1in air impact puts on. Very versatile and a life saver for other work. I feel lost when I don't have it. $205 for the bare tool plus batteries.
Sent from my SM-G965U using Tapatalk
Sent from my SM-G965U using Tapatalk
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
Now I wouldn't say my Milwaukee (3/4" 18 volt impact-new design) is as strong as my air impacts, but it is strong. It cannot take off lug nuts that have been tightened with say a 1" impact though. I've tried and it's a "No-Go" . My 1" impacts can reach power levels of 2000 Ft of torque. No way is any electric impact going to take that nut off. Just saying.
Mike944
Member
- 36
- 3
- 8
- Location
- Haddam, Connecticut
I have one of these torque multipliers. no cords, batteries or hoses, and it's cheap. Works great for breaking nuts loose and tightening them. Not good for running them on and off the threads, but one of the best tools I bought for this truck.
Quality isn't terribly good, but it's perfectly usable, and EASILY breaks lug nuts loose with almost no effort.
https://www.walmart.com/ip/Torque-M...l-Truck-Tire-Remove-Remover-Lugnuts/178541500
there are a bunch of different kits out there. some of them have both the 1-1/2 hex, and the proper square drive for the rears.
Quality isn't terribly good, but it's perfectly usable, and EASILY breaks lug nuts loose with almost no effort.
https://www.walmart.com/ip/Torque-M...l-Truck-Tire-Remove-Remover-Lugnuts/178541500
there are a bunch of different kits out there. some of them have both the 1-1/2 hex, and the proper square drive for the rears.
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
I would never take this lug nut tool on the road with me. It is very cheaply made ( I know as I bought one and took it apart ) and can easily break on you. It is not a tool to depend on. Now there are several torque-multiplier tools out there worth having. The first is the military one. It is a sound piece of equipment that will take years of abuse and still work fine.
Then there are the "3 to 1" and "4 to 1" torque-multipliers out there. I bought one off eBay for under $200.00 that is a real nice unit. I also bought a nice 1" drive one with a "4 to 1" ratio that can go to 2000 ft Ibs of torque easily. It was under $300.00 . So you don't need to spend the $1000.00 to $2000.00 "Snap-On" tools wants for its torque-multipliers. I forgot to mention I do have a really nice military one for taking track off tanks that can go up to 5,000 ft Ibs . I bought it off eBay for under $500.00 . Basically brand new ! So look around for your tools . You can find what you need at good prices and they will be quality tools that will last your lifetime.
Larry Weibert
Active member
- 102
- 119
- 43
- Location
- Youngstown New York
To what Rusty was saying about the HF Earthquake XT impacts. If it helps I own an auto repair and towing facility with 4 mechs.
I don't wrench as much as I used to and many times look for value in other than Snap-on. Of course I get the laughs and comments from my employees. So I had a young guy I was starting and bought him some start up tools. I bought him a HF EQ XT 1/2 impact. We do a lot of tires. Within a month I noticed the other guys were steeling his to do tires. When I asked them why they said that they like it better then there snap on and the weight is nice if your using it all day. They now all have HF XT wrenches on there carts and the strap ons are in there lower section of there box. They have been beating them up for over a year no failures.
I don't wrench as much as I used to and many times look for value in other than Snap-on. Of course I get the laughs and comments from my employees. So I had a young guy I was starting and bought him some start up tools. I bought him a HF EQ XT 1/2 impact. We do a lot of tires. Within a month I noticed the other guys were steeling his to do tires. When I asked them why they said that they like it better then there snap on and the weight is nice if your using it all day. They now all have HF XT wrenches on there carts and the strap ons are in there lower section of there box. They have been beating them up for over a year no failures.
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
I bought one when they first came out just to see what it could do. Afterwards I went back and bought another one ! They are a good quality tool and I don't see why they cannot last years in a hard working environment like a tire shop. Just before I retired from the transit agency there where several mechanics who where buying tools form other places then just from the "Snap-On" man. They got some ribbing from the other mechanics for awhile, but then we all saw how these other "cheaper" brands where still holding up well after some hard use. One tool brand in particular caught my attention, that was "Gray Pneumatic" impact sockets from Taiwan. I now own several complete socket sets from them from 1/4" to 1" and they all work great ! So I have pretty much put away my prejudice against cheaper but still quality tools. Of course Harbor Freight still carries some really garbage tools ! But they are slowly changing to better quality items I see.
I forgot to add that that is really nice of you to help your young mechanics get started with their tools Larry ! I had to go into debt for several years to pay off my starter set of tools.
Every payday the Snap-On man would come around and I would hand him a check that was about half my salary. I remember feeling like an indentured servant ! I thought I would never get out from under that debt !
So a hearty "good for you Larry" for helping !
Last edited:
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
Yes ! That is what I was saying in my post. The original military unit is hard to beat. I own several just in case one goes missing.
- 241
- 85
- 28
- Location
- North Augusta SC
Where can one be bought?
- 9,604
- 1,493
- 113
- Location
- mid- michigan
evil-bay and they come up from time to time in the classifieds .
8madjack
Active member
- 416
- 78
- 28
- Location
- Gold country Ca.
I just got one of these military torque multipliers it didn't come with the bars. I have super singles on my m931 A1 and I'm trying to figure out how this would work, I don't have the square studs.
snowtrac nome
Well-known member
- 1,674
- 139
- 63
- Location
- western alaska
You have to have budd nuts for those to work. get a regular 3 to 1 torque multiplier off flea bay for your super singles and other big @$$ fasteners.
- 6,426
- 4,985
- 113
- Location
- Ft. Lauderdale, Florida
excuse redundancy
I like redundant
You need this stuff
Remember to loosen lugs and nuts on a Deuce always turn them towards the rear of the truck no matter which side you are on. First go look and assure all those on the drivers side are stamped "L" and all on the other side are stamped "R.;
Never can tell what "they" did unless you check first.
View attachment Ken-tool brochure.pdf
I like redundant
You need this stuff
Remember to loosen lugs and nuts on a Deuce always turn them towards the rear of the truck no matter which side you are on. First go look and assure all those on the drivers side are stamped "L" and all on the other side are stamped "R.;
Never can tell what "they" did unless you check first.
View attachment Ken-tool brochure.pdfAttachments
fpchief
Well-known member
- 1,041
- 220
- 63
- Location
- South Alabama
This may be mentioned somewhere else in this thread if so....my apologies. I recently purchased the Bauer 1/2" electric impact from HF. It spun the lugs off (with a 3/4 to 1/2 reducer) like it was not a deal at all. I went to my other deuce because i KNOW its lugs have not been messed with in a very long time and it spun them off quickly also...$99 and worth every penny.
8madjack
Active member
- 416
- 78
- 28
- Location
- Gold country Ca.
Thanks, thats what I suspected. I'll keep it in my tool box in case I come across a truck with duals, like my friends deuce.
Besides, I'm kind of a tool whore
rustystud
Well-known member
- 9,284
- 2,994
- 113
- Location
- Woodinville, Washington
Nothing wrong in wanting good tools. It's an "investment" . That's what I tell myself every time I buy a new one !Thanks, thats what I suspected. I'll keep it in my tool box in case I come across a truck with duals, like my friends deuce.
Besides, I'm kind of a tool whore