-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What would a LMTV completed run? Pic enclosed Also where do you find the hood racks
- Thread starter DukeNukem
- Start date
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
Good Laugh doghead
Duke.... the rack is custom and that is only way you can get one. Probably cost couple grand if its a high dollar shop; or lot of beer and price of tube, if its a friend with a bender.
M1079 trucks (one with the box already there) prices are all over the place. $12,000 to $30,000
Duke.... the rack is custom and that is only way you can get one. Probably cost couple grand if its a high dollar shop; or lot of beer and price of tube, if its a friend with a bender.
M1079 trucks (one with the box already there) prices are all over the place. $12,000 to $30,000
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
I believe that's member Adventure Driven's truck. You couldn't touch one in his condition for $30k.
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
didn't he build it himself though.... if so ... add labor and profit if your using a builder and that triples the cost.
pontiac62
Member
- 180
- 4
- 18
- Location
- battle creek, mi
The truck pictured looks like Adventure driven m1079. He is a member on here. You could pm him. He had a lot of work done to it.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
No offense to Profo but I've seen Adventure Driven's truck in person and other than those couple of dings in the side of the box the truck is immaculate and the interior of the box is even nicer. And yes it has high speed gears, AC, and now, about 1000 offroad lights on the cab rack. Again, not trying to say one is better than the other just that this truck is extremely nice and not easy to tell from one pic.
pontiac62
Member
- 180
- 4
- 18
- Location
- battle creek, mi
Price will vary a lot due to
1. The fact everyone has there own taste in what amenities they want on the truck.
2. How much work you can do yourself.
3. Price of your base model truck.
Just a few examples. I could list more but I’m sure by the time I get this pecked into my phone it’ll probably already be answered. Lol
Previously mentioned prices is a idea on costs.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
1. The fact everyone has there own taste in what amenities they want on the truck.
2. How much work you can do yourself.
3. Price of your base model truck.
Just a few examples. I could list more but I’m sure by the time I get this pecked into my phone it’ll probably already be answered. Lol
Previously mentioned prices is a idea on costs.
Sent from my iPhone using Tapatalk
Man of few words
M1081 LVAD
coachgeo
Well-known member
- 5,147
- 3,463
- 113
- Location
- North of Cincy OH
similar price for some Unimog builds and they are typically built on used (but renewed) trucks as well. While IMHO both are overpriced..... do believe Acela does completely renew their trucks like a high dollar Unimog builder would as well.
They said no engine rebuild on the phone
- 10,464
- 6,540
- 113
- Location
- Camp Wood/LC, TX
Buy a zero mile SD Brazos 4x4 with Cummins power for $40K here in Houston at Worldwide Machinery. They are getting desperate to sell them.
- 3,871
- 497
- 83
- Location
- Gray Court SC
Andy used to own that truck and it looked like it came off show room floor
- 10,464
- 6,540
- 113
- Location
- Camp Wood/LC, TX
Walk in with 40K and you will drive home.
- 10,464
- 6,540
- 113
- Location
- Camp Wood/LC, TX
Yup. Dream rig for all you Expo types.