Chainbreaker
Well-known member
- 1,796
- 1,992
- 113
- Location
- Oregon
My space bar does have an identification on it. It's the only key that has space on it.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Moderators~ Time for a Generator only forum!?
- Thread starter Tinstar
- Start date
- 16,766
- 24,079
- 113
- Location
- Burgkunstadt, Germany
Thats positive thinking!!!!!!!!!!!!!!!
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Anything not Genset related in the Auxiliary Equipment Forum gets swamped over with all the Genset threads.
Any info on a dedicated forum for Gensets only?
Any info on a dedicated forum for Gensets only?
boatman69
New member
- 97
- 9
- 0
- Location
- Cape Coral, Fl
I think everyone should pitch in a buck or two to have vBulletin upgraded to the latest version!
- 9,604
- 1,493
- 113
- Location
- mid- michigan
Kick in $15 and become a premium member . The site was just upgraded last fall.
[h=1]Premium Membership Explained[/h]
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Still need a dedicated Generator Only Forum.
The generator threads drown everything else out.
The generator threads drown everything else out.
- 14,639
- 4,817
- 113
- Location
- Buchanan, GA
I wouldn't be opposed to creating another forum. But historically this always ends up being more complaints once it's happened. (Hot rod forums for example. We created them, then it turns into argument/debate on what belongs where.) Also it'd be nice to have someone experienced in moderation to take on this "job" who also knows the subject matter.
- 2,532
- 2,059
- 113
- Location
- Efland, NC
I'd be happy to help. I'm the forum admin for the 24 hours of lemons (forums.24hoursoflemons.com).
- 16,766
- 24,079
- 113
- Location
- Burgkunstadt, Germany
Agreed.
- 3,829
- 5,939
- 113
- Location
- MA
Based on total volume of posts, this sectional forum should be about Generators.... so yeah, I think its well worth the time to split the posts out (or its easier to move all the non power generation posts to their own subsection). I'd be amenable to helping if need be too, as I have been what they call a 'super moderator' (in between regular moderators and admins) over at www.ford-trucks.com for 15 years now.
- 16,766
- 24,079
- 113
- Location
- Burgkunstadt, Germany
If I can help in any way, i will.
dav5
Active member
- 396
- 183
- 43
- Location
- Mono, Ontario
It makes a lot of sense to move non generator stuff to a new thread and then rename the remaining info as generator only. There are offers of assistance from 3 of the most knowledgeable contributors on the site. I'm sure they would have no problem deciding the best way to do it.
dav5
Active member
- 396
- 183
- 43
- Location
- Mono, Ontario
Also I don't want to muddy the waters but once some help is accepted would it be too much to get a 'Sticky" for MEP-802A MEP-803A Filters and Parts???
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
One thing at a time.
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Any updates?
- 14,639
- 4,817
- 113
- Location
- Buchanan, GA
I will consider creating a new section. But I just am reluctant due to the history behind the CUCV/Deuce/5 ton sub forums. It always turns into people complaining about things not being where they're supposed to be.
I could grant moderator access to people that have offered for this new area.
- 544
- 276
- 63
- Location
- Eubank, KY
I do not know of the past problems that have been encountered in the CUCV/Deuce/5 ton sub forums so I cannot comment on that issue but that might be a good start.
Anything that would lead to consolidation of information on different sets and issues would be an improvement.
Having read through the many pages of the auxilary section, I've found the participants to be most helpful and courteous. I think that a separate generator sub forum would greatly benefit both the veterans of this forum and new comers who are seeking information to troubleshoot and repair their gensets.
Most of the common problems and solutions found concerning these various sets seem to have been addressed at one time or another throughout the pages, however it sometimes becomes quite the tedious search to sift through and find.
Like having a huge container with all the issues thrown in and no drawers or folders to separate things out for easy access.
I too would like to see a separate generator sub forum where info could be sorted out by model/size/issue/solution/parts etc.
Respectfully,
Farmitall
Last edited:
- 4,290
- 1,776
- 113
- Location
- Edmond, Oklahoma
Bump
- 14,639
- 4,817
- 113
- Location
- Buchanan, GA
See your ending quote below
This is one "issue" that arises. Further splintering. The other one is the arguments/debates about what belongs where.
Now on the absolute flip side of this, I deal with new users daily that either have no clue how to start a thread, find the appropriate forum for a thread, or place threads in the completely wrong forum. (To the point that I have a "canned" email explaining things)
I would think that this forum becoming generator exclusive and a non-generator subforum would be the easiest division of this section. Understand though, that will have the need for those who have offered help to review threads one by one to find the "not generator" content.