Chief B
Active member
- 169
- 64
- 28
- Location
- Milton, FL
Not sure if y'all remember the noise mine started making when I was on the highway or not. Attached is a recording of it. Anyway, Upon starting to take it apart to see the culprit, I found a couple bent pushrods on the passenger side. From doing a little research, I see that keeping this at high RPMs can bend these, but will this alone cause this noise? Just curious if I could get away with simply putting a new set of pushrods in or if I need to continue taking it apart.
View attachment HMMWV engine noise.wmv![1.png 1.png](https://www.steelsoldiers.com/data/attachments/536/536760-6c5f7d8d60f71ee1f56f3b47338b2485.jpg)
![2.png 2.png](https://www.steelsoldiers.com/data/attachments/536/536761-318545bf9ac1eb4760b21630a87b5fa6.jpg)
![3.png 3.png](https://www.steelsoldiers.com/data/attachments/536/536762-ff80650e5da928505df13358c6964464.jpg)
View attachment HMMWV engine noise.wmv
![1.png 1.png](https://www.steelsoldiers.com/data/attachments/536/536760-6c5f7d8d60f71ee1f56f3b47338b2485.jpg)
![2.png 2.png](https://www.steelsoldiers.com/data/attachments/536/536761-318545bf9ac1eb4760b21630a87b5fa6.jpg)
![3.png 3.png](https://www.steelsoldiers.com/data/attachments/536/536762-ff80650e5da928505df13358c6964464.jpg)