Deuce clutch replacement

[rustystud]

Thanks, Rusty. I had a friend who is retired master mechanic examine it, and in his opinion there are many cracks, and some of them are quite deep, so it should be replaced. His assessment seems reasonable to me.

Yeah. If the cracks go deeper then a 1/8" of an inch then you must replace the flywheel. To bad .

 

[blisters13]

I'm lucky enough to have the military tranny hoist that sits on the floor of the truck. Pretty cool design.

Can we see a few pics of the hoist (hopefully in action)?

 

[gringeltaube]

Can we see a few pics of the hoist (hopefully in action)?

I had these on file; can't remember who posted them...

 

[blisters13]

That is BADASS

THANKS for posting those

 

[Ajax MD]

Wow, that's pretty cool. The M809 -20 calls for a transmission jack under the truck for the transmission and transfer case. No photos, but sketches.

 

[davidb56]

I got one of those HF transmission jacks......if you crawl out from under your truck to take a leak....it seems to think it should leak down too. Pile of junk.

 

[rustystud]

I got one of those HF transmission jacks......if you crawl out from under your truck to take a leak....it seems to think it should leak down too. Pile of junk.

I've had good luck with Harbor Freight's transmission jacks. I have both the medium and heavy duty models.

 

[Ajax MD]

I got one of those HF transmission jacks......if you crawl out from under your truck to take a leak....it seems to think it should leak down too. Pile of junk.

I guess I got lucky with mine. I try to stay clear of Harbor Freight but sometimes I need a tool "now" or a US made equivalent isn't available or the price differential is just more than I can shoulder.

 

[davidb56]

I have a HF floor jack now for 20 years that works great. this transmission jack is junk and its about 1 year old. I got a cement mixer from them that was (its dead now) junk too, but my grinder is finally starting to die after 10+ years, and thats pretty darn good for a grinder.......especially if you weld like Rusty......JK. its a welders joke, he gets it.

 

[rustystud]

I have a HF floor jack now for 20 years that works great. this transmission jack is junk and its about 1 year old. I got a cement mixer from them that was (its dead now) junk too, but my grinder is finally starting to die after 10+ years, and thats pretty darn good for a grinder.......especially if you weld like Rusty......JK. its a welders joke, he gets it.

I get it !