Kemper
Member
- 36
- 16
- 8
- Location
- Centerville, NJ
Because I didn’t find much when I searched for info.
Got a warm 18k severe duty winch for a good price off eBay. Take off from an MRAP.
Planning on 100% bolting the bumper to the winch box and welding the winch box to the torsion tube. That way the bumper can be removed if it gets damaged.
Steel: A572 GR60 5/16”
Still to do:
Trim excess steel from top edge
Drill holes for mounting hw
Drill holes for access to torsion tube
Burn slot for cable
Weld everything
Wire everything
Build cover that will be flush with the top of the bumper
Build mounting plates for bumper to winch enclosure
Power coast finished assembly
Here are some progress pics:
Sent from my iPhone using Tapatalk
Got a warm 18k severe duty winch for a good price off eBay. Take off from an MRAP.
Planning on 100% bolting the bumper to the winch box and welding the winch box to the torsion tube. That way the bumper can be removed if it gets damaged.
Steel: A572 GR60 5/16”
Still to do:
Trim excess steel from top edge
Drill holes for mounting hw
Drill holes for access to torsion tube
Burn slot for cable
Weld everything
Wire everything
Build cover that will be flush with the top of the bumper
Build mounting plates for bumper to winch enclosure
Power coast finished assembly
Here are some progress pics:
![](http://uploads.tapatalk-cdn.com/20191222/cd314721211726cfcde856358e5bf4af.jpg)
![](http://uploads.tapatalk-cdn.com/20191222/918dead58ffd981837cc46224ad5e5bb.jpg)
![](http://uploads.tapatalk-cdn.com/20191222/d2bfa20e16f01fd170ee03903a996f77.jpg)
![](http://uploads.tapatalk-cdn.com/20191222/a78efe8c2bacc697fb278edf7e0d38ce.jpg)
![](http://uploads.tapatalk-cdn.com/20191222/b0237e11dbc2efad2a1a87960419f37a.jpg)
Sent from my iPhone using Tapatalk