• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Looking for a debugging/trouble shooting manual for the M1161/M1163?

BFGOrdnance

New member
16
7
3
Location
Scio / Oregon
Hey there. I have been slowly getting the manuals gathered from this wonderful forum, but I have yet to see a basic operators or troubleshooting manual. We recently got 2 of our 3 growlers (the other is still awaiting EUC approval even though it was the first one we purchased go figure). They both started up and ran great, but then one of them just won't start again. Likely a fuel issue, but we are just trying to track down to make sure there is not something stupid like a fuel cutoff switch, etc. I'm hoping to find a checklist type guide that allows us to walk thru step by step. Has anyone seen something like this?

Thanks.
 

SLC

New member
3
0
1
Location
Belle Center, OH
Hey there. I have been slowly getting the manuals gathered from this wonderful forum, but I have yet to see a basic operators or troubleshooting manual. We recently got 2 of our 3 growlers (the other is still awaiting EUC approval even though it was the first one we purchased go figure). They both started up and ran great, but then one of them just won't start again. Likely a fuel issue, but we are just trying to track down to make sure there is not something stupid like a fuel cutoff switch, etc. I'm hoping to find a checklist type guide that allows us to walk thru step by step. Has anyone seen something like this?

Thanks.
I need a favor if you can . I just got my M1163 in and noticed that 4-9-11-12 in the fuse blocks are missing.Could you tell me if these are used and what amp they are. You can email me at samcapua@ gmail.com. I would greatly appreciate it. Thanks
 

W427

Member
68
36
18
Location
Seattle, WA area
I need a favor if you can . I just got my M1163 in and noticed that 4-9-11-12 in the fuse blocks are missing.Could you tell me if these are used and what amp they are.…
@SLC - you want the file "ITV_FUSES-TM 2320-OR-B.pdf" in this post. Also, a convenient printable fuse cover label is here.
Both you and @BFGOrdnance should get the Operator's Manual (TM 2320-OR/B, almost 600 pages) using the info in this post. Email only, please do not call them, and with COVID disruption be patient for replies. The TM Shop Manual is not yet released. However, many additional manuals, supplements and references are found by searching the site. Good luck! (y)
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks