Antenna hole grommets

[Kenneth Cole]

Hi
Has anyone found a source for the rubber grommets that fit into the rear antenna cable holes. there about 1 3/8" in Dia.

Thanks
Ken

 

[juanprado]

There are different ones.
I have seen for one cable and a wider one for multiple. Which are you seeking?

They also use a metal flange.

 

[TOBASH]

Amaz0n.c0m

 

[Kenneth Cole]

HI
The cables are for radios, Ham and AM/FM . I have an antenna on each rear side. I need a grommet with about a 1/2" center hole. I wasn't sure if there was a grommet that the military used.
Ken

 

[TOBASH]

Just buy a regular grommet and drill a hole in the center. Make one out of a mold using black silicon. Use rubber that is half inch thick and cut a 3 mm large and then groove the periphery and cut a hole in the center. Use a 1/2 inch outer diameter tube and slit it down the center and place your wires through it.....

 

[papakb]

McMaster-Carr

Choose from our selection of grommets, including over 1500 products in a wide range of styles and sizes. In stock and ready to ship.

www.mcmaster.com

In almost 50 years of working in industry I have consistantly found this company to be one of the most reliable to deal with. They don't have the minimum orders that prohibit you from using a lot of industrial suppliers and they're right on top of things when it comes to shipping. Their extensive catalog has almost anything you might need.

 

[pig9r]

HI
The cables are for radios, Ham and AM/FM . I have an antenna on each rear side. I need a grommet with about a 1/2" center hole. I wasn't sure if there was a grommet that the military used.
Ken

The antenna mounts were part of the demil process on my M998. I was left with a metal plug with a hole drilled in the center for the cable. I found a replacement plug here https://www.ebay.com/itm/4-Pack-1-1-2-Metal-Hole-Plugs-Nickel-Plated-SP-1-5-NK-/282855509314

These were also used for running cables on other parts of the body. I have one on my passenger side inner rear fender. 12338085 and 12338092.

 

[Crapgame]

The split grommet for between the wheelhouse and the antenna mount is Part # 12338098, package of 10 NIW $16.99, out of Fayettenam, NC if you search on the streng Verbotten auction site