Redpawn
Active member
- 146
- 28
- 28
- Location
- St.Cloud FL
Sounds like it's building pressure in the can. So a stopped up filter could be the problem.
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
What have you done to your 5 ton this week?
- Thread starter dezert ratt
- Start date
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
Yea! More money to be eaten by the "Beastie Wagon". Sigh. Thanks, Redpawn. Off to order a filter...
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
So, found the filter kit. I checked BOTH the "O" level and the "I" level manuals for the "how to" on changing the filter. Not there, just pump R&R, hose/line R&R. Anybody happen to know what I am overlooking/ failing at Google-fu on? Sometimes I *hate* computers...
Redpawn
Active member
- 146
- 28
- 28
- Location
- St.Cloud FL
I think you have to take the pump off and then remove the can from it. It looks to go together like a standard chevy power steering pump only bigger.
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
Joy. Thanks, Redpawn. That's about what I was thinking. yea.
Jakelc15
Active member
- 718
- 37
- 28
- Location
- Hanover Pa
5 ton Parts Quick Reference Spreadsheet
Thanks for the spreadsheet, there are a couple numbers that are in the wrong place, line 91listed as air filter - napa fil 3472 is a fuel water seperator fleet fs1251 is a fuel water seperator
www.steelsoldiers.com
Hope this helps. The kit I got came with a drawing
Wait, you're saying that on the 809 series trucks there is a power steering fluid FILTER? How the heck did I miss that?
Whoa... I had no idea!
- 649
- 86
- 43
- Location
- Broad Run VA
Drove around with no real purpose. Running out of things to do. Take out burgers then ice cream. Ate in the S-280 with my son. A "picnic" day. Cold and windy.
Jakelc15
Active member
- 718
- 37
- 28
- Location
- Hanover Pa
The filter being clogged won't make the pump leak. It will bypass the filter by overcoming the spring.
The return elbow leaking probably means it is cracked and needs rebrazed.
Don't use a prybar against the reservoir section to tension the belt. It deforms it and makes it leak.
I run ATF in my pumps and also the fleet at work. 10w hyd oil may be better if you don't want the additives. Never used power steering fluid.
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
My pump is puking out through the ?breather cap, next to the fill cap, hence the thinking of the "plugged/ stopped up" filter.
Jakelc15
Active member
- 718
- 37
- 28
- Location
- Hanover Pa
Ok. I misunderstood where your leak was.
I still do not think the filter would cause it to overflow. The filter is the return side.
I have seen these spit fluid out from overheating, having a leak/sucking air, and from improper fluid level.
They are pretty picky on level. One of my pumps I installed a 45° elbow on the breather to level and raise it slightly.
I hope I was some kind of help
Crf450x
Well-known member
- 275
- 350
- 63
- Location
- Fall Branch, TN
How is the fluid level? I’ve had several pickup trucks spit fluid out because they were low. Sounds backwards but once it starts mixing in air it foams up and makes a mess.
srodocker
Well-known member
- 6,549
- 69
- 48
- Location
- Lacey, Washington
my 928 also leaks a ton as well out the top. Highly annoying lol.
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
Well, I try to keep the fluid at just below the top of the window. I am familiar with aeriation issues from working on helos. I am going to try replacing the return line and see if that helps, as it is looking kind of "questionable". The soft line is odd looking as in kind of almost soggy. I will also try to find an elbow to see if that might help.
msgjd
Well-known member
- 1,079
- 3,311
- 113
- Location
- upstate ny
Nice job ! Also first time i've seen factory safeties on dogbones... For many years I've welded 3/8"x 1-1/2" or 2" flat stock onto any dogbones with cracking rubber in my private motor pool... About 40 years ago in my armor unit about seven of us were in convoy at max speed on blacktop in a hurry to get back before dark. It had been a 5-hour uneventful trip and all of a sudden the M54 I was following locked 'em up and slid slightly sideways in the road with a whole bunch of smoke and multiple skid marks. Initially I thought they almost hit something, but no, the M54 sat alone in a cloud of smoke blocking half the travel lane. The tires on the front-rear axle looked like they tried to climb up on top of the fuel tank. The tires on the other side were jammed tight into the ones on the rear-rear axle. One or two of the dogbones had popped off. Never seen a 5-ton stop that quick. From what I heard later, the wrecker crew had a helluva time getting things pulled back into place
Last edited:
msgjd
Well-known member
- 1,079
- 3,311
- 113
- Location
- upstate ny
round dogbone mixed with regular, came here that way
preparing for 24
" lift kit (imagine that!)
preparing for 24" lift kit (imagine that!)Ah, I suspect that's your problem. That's actually too high. If you can get your face really close to the window, you'll see that near the top of the window is the "hot" level. The "cold" level is a fair bit below that. The marks are difficult to see on the sight glass.
When I bought my truck, the PO had accidentally overfilled the P/S fluid and it burped out the vent until I siphoned a little out of the pump with a turkey baster.
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
Copy. Will correct this. Thanks!
77 AMG
Active member
- 403
- 62
- 28
- Location
- Owingsville, KY
Look what showed up today.