-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
mpe803a
- Thread starter mchlsprgn
- Start date
- 16,784
- 24,129
- 113
- Location
- Burgkunstadt, Germany
First, pull the K2 out. Take it apart. They were often filled with water, and it corroded them up. A bit of sand paper and it can be fixed. Wonk cost a bit of money, and the worst that can happen is it don't work. The relay is to be had in the internet.
ok i'll give it try can the percent of power be fixed? Thanks Mike
69birdman
Active member
- 201
- 139
- 43
- Location
- Summerfield, Fla.
If you haven't applied any load to the set yet , the percent gauge is not going to move.
true , but it moves on its own not running . Do you know were i can find body parts top panel were exhaust comes out
- 16,784
- 24,129
- 113
- Location
- Burgkunstadt, Germany
Why don't you try the parts wanted section here in SS.
cant find parts wanted
does the fuel pump in the gen draw from an auxilery tank?
- 16,784
- 24,129
- 113
- Location
- Burgkunstadt, Germany
Try going to the top of the page to Classifieds.
- 558
- 844
- 93
- Location
- Riverhead, NY
Link here but it's not too hard to find...
Still looking for top rear panel mep803 and how to hook up aux fuel need a pic
Zed254
Well-known member
- 866
- 466
- 63
- Location
- S. Hampton Roads, VA
Picture of aux. fuel connection...........https://www.steelsoldiers.com/threads/jerry-can-fuel-pickup-adapter-and-hose-for-wavian-nato-cans.181889/#post-2229291
Zed254
Well-known member
- 866
- 466
- 63
- Location
- S. Hampton Roads, VA
Use ARMY TM 9-6115-642-24P and search term 'fuel' and you will arrive at Figure 17. Fuel Tank, Pumps and Lines (Sheet 1 of 2). This will show you how the aux. fuel system works.
- 16,784
- 24,129
- 113
- Location
- Burgkunstadt, Germany
Well.......................................... if you want to see how it works, go to the -10 and -24 TM's. The -24P just shows you the parts, not how it functions. Shortly explained, hook up an aux. fuel line to an Aux fuel source, and after the set starts, place the S1 in the Aux Run position.
Zed254
Well-known member
- 866
- 466
- 63
- Location
- S. Hampton Roads, VA
I thought the -10 was a little light on details but mchlsprgn definitely should start with the Operator's Manual to understand his machine.
TM 9-6115-642-24 definitely has some good trouble shooting / functional explanations. I believe mchlsprgn has some book work to do!!!
TM 9-6115-642-24 definitely has some good trouble shooting / functional explanations. I believe mchlsprgn has some book work to do!!!
Howdy,
Start off in this thread. The 2nd post has quick links to lots of stuff. The 3rd post has the links to the manuals here on Steel Soldiers.
MEP-802A MEP-803A Filters and Parts
Howdy, MEP-802a and MEP-803a use all the same filters and such MEP-802A ONAN DN2M 2-cylinder engine (Lister-Petter LPW2) Liquid cooled diesel, aluminum housing MEP-803A ONAN DN4M 4-cylinder engine (Lister-Petter LPW4) Liquid cooled diesel, aluminum housing Oil Filter Spin-On (FILTER ELEMENT...
www.steelsoldiers.com
po gave tm to my son same name defferent po # got some reading to do thanks for the help
whats this fuse mod