• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

mpe803a

M

mchlsprgn

Member
143
14
18
Location
jamul cal
kloppk said:
Yes it's a snap to install.
Remove the 8 wires from the existing VR. Remove the 4 screws attaching it to the back wall. Lift it out.
Secure my VR with 4 new screws that are provided.
Hook the 8 wires back up to the new VR. Attach two wires from my VR. One to the Oil Pressure Gauge, one to an unused terminal on K15.
Remove the old voltage adjustment pot. from the front panel. Attach my new voltage adjustment pot. to the front panel.
Done.
Comes with a step by step installation procedure with pictures. Couldn't be easier.
Click to expand...
ok i'm sold send me one please how to pay ect.....thanks Mike
 
M

mchlsprgn

Member
143
14
18
Location
jamul cal
kloppk said:
Yes it's a snap to install.
Remove the 8 wires from the existing VR. Remove the 4 screws attaching it to the back wall. Lift it out.
Secure my VR with 4 new screws that are provided.
Hook the 8 wires back up to the new VR. Attach two wires from my VR. One to the Oil Pressure Gauge, one to an unused terminal on K15.
Remove the old voltage adjustment pot. from the front panel. Attach my new voltage adjustment pot. to the front panel.
Done.
Comes with a step by step installation procedure with pictures. Couldn't be easier.
Click to expand...
kloppk said:
Yes it's a snap to install.
Remove the 8 wires from the existing VR. Remove the 4 screws attaching it to the back wall. Lift it out.
Secure my VR with 4 new screws that are provided.
Hook the 8 wires back up to the new VR. Attach two wires from my VR. One to the Oil Pressure Gauge, one to an unused terminal on K15.
Remove the old voltage adjustment pot. from the front panel. Attach my new voltage adjustment pot. to the front panel.
Done.
Comes with a step by step installation procedure with pictures. Couldn't be easier.
Click to expand...
 
K

kloppk

Well-known member
Steel Soldiers Supporter
2,145
3,526
113
Location
Pepperell, Massachusetts
If you are referring to the Voltage Regulator, there are no adjustments needed.

I assume you didn't mean Governor Controller
 
Last edited:
Guyfang

Guyfang

Moderator
Staff member
Moderator
16,753
24,053
113
Location
Burgkunstadt, Germany
dav5 said:
The best option would be to buy Kurt's VR. It is very reasonably priced and has many positives including not needing the varistor and fuse plus it protects the quad windings. Save the old one for a spare in an emergency. I wouldn't have a 803 or 802A generator with the OEM VR now that Kurt has provided an improved VR.
Click to expand...
This is where you went wrong. You confused a VR, Volt Regulator with a governor control. The Vr is still a good idea, but what we really need to know now, is what your gen set will and will not do. Because I am lost here now.

Hi Kurt ...........I have a question. Does your govinor control elemenate manuel adjusting ?
 
M

mchlsprgn

Member
143
14
18
Location
jamul cal
kloppk said:
Mike,

Sent you a PM with purchasing details.

Kurt
Click to expand...
Guyfang said:
This is where you went wrong. You confused a VR, Volt Regulator with a governor control. The Vr is still a good idea, but what we really need to know now, is what your gen set will and will not do. Because I am lost here now.

Hi Kurt ...........I have a question. Does your govinor control elemenate manuel adjusting ?
Click to expand...
On your's and others advice, ordered Kurts vr he's sending today. As for confusion me too I'm a carpenter i can build a house but not a gen. Both gen start and run great ! they produce power haven't load tested yet Thanks for the help Mike
 
M

mchlsprgn

Member
143
14
18
Location
jamul cal
can anybody give advice on changing the fuel/ water separator filter mep803 . looks like it's been on since 2000 also how do i bleed air out of the fuel system?
 
R

Ray70

Well-known member
2,592
5,900
113
Location
West greenwich/RI
Twist it really hard! eventually it will come off, or shred.... one or the other.
Strap wrench or real large channel lock pliers.
prefill with diesel before installing new one if you want.
It will self-bleed through the return line, just leave the pump running for a while, but if you loosen the banjo bolt or the filter cup that will speed the process a lot.
The sound of the pump will change a little once it's bleed out.
 
You must log in or register to reply here.
110,872members
165,308threads
2,326,110posts
2,107online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks