-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Mep-803a Switch,Frecuency Trip Burn
- Thread starter gstboy69
- Start date
jmenende
Well-known member
- 475
- 413
- 63
- Location
- Puerto Rico
;( help me!!!
MEP802A - MEP803A Electronic Switch SPS-100-88-21091, NSN 5930-01-396-2940 | eBay
NSN: 5930-01-396-2940.
www.ebay.com
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
Are you sure it's burned out? The brown you see inside is probably just the conformal coating on the board and wires.
One supplier that people have been able to buy them from is Quantum Controls. People in the past have been able to buy them for $75 from them.
Here is the contact info for the sales manager there.
Harry Webster, Sales Manager
HarryW@quantum-controls.com
You could also try contacting Technology Research Company on the chance they'd sell you one.
TRC
One supplier that people have been able to buy them from is Quantum Controls. People in the past have been able to buy them for $75 from them.
Here is the contact info for the sales manager there.
Harry Webster, Sales Manager
HarryW@quantum-controls.com
You could also try contacting Technology Research Company on the chance they'd sell you one.
TRC
Hello,
Thanks for the information yes its burned, I opened the relay and the internal chip is opened and crack. When I removed the relay was white of fumes in the interior.
- 2,789
- 6,666
- 113
- Location
- West greenwich/RI
Question is.... why did it burn up? I'd hate to see you spend $159 or even $75 on a new one and have that one cook itself right out of the gate as well...
I can't help diagnose what caused it, but hopefully others have experience with it to help you check things before replacing it.
I can't help diagnose what caused it, but hopefully others have experience with it to help you check things before replacing it.
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
Was it the black device with 8 leads that cracked or was it the black device with 3 leads that cracked?
- 3,963
- 6,427
- 113
- Location
- MA
Pricing as of August 2020, direct from Quantum
1- 10 pieces. $100.00 ea
1- 10 pieces. $100.00 ea
When the generator was on, adjust the frequency a little to take it to exactly 60hz with the generator handle. I understand the failure may be related to this matter. The only thing that I adjusted was the frequency and 15 minutes after adjusting it the generator turned off, I smell of a burned electrical part and when I open the panel I find the relay full of white smoke. hope this helps.
- 17,495
- 25,879
- 113
- Location
- Burgkunstadt, Germany
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
There is someone on this forum that has some aftermarket ones he'd like to sell. I'll PM you his contact info.
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
I just PM'd you his contact info
- 17,495
- 25,879
- 113
- Location
- Burgkunstadt, Germany
I know someone who might be in the need also. So If you think there may be some room to move there, let me know.
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
Sent you a message
- 17,495
- 25,879
- 113
- Location
- Burgkunstadt, Germany
Your a good man Charlie Brown!
jmenende
Well-known member
- 475
- 413
- 63
- Location
- Puerto Rico
If there is still room let me know. ThanksSent you a message
I'd like to add one to my spare parts stash. If possible please let me know how I can get one of these.
Thanks,
-Craig
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
My source is out of the S14's.
However.... I will be producing them in a couple of weeks.
However.... I will be producing them in a couple of weeks.
- 2,260
- 3,962
- 113
- Location
- Pepperell, Massachusetts
First batch of replacement S14's nearing completion
Will post up when they are ready to ship.
Will post up when they are ready to ship.