• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

in-tank fuel pump runs, but does not feed

V

VanMan

New member
10
9
3
Location
Trier/Germany
Hello,
I've got a problem with my in-tank fuel pump.
The pump runs, but doesn't feed any diesel.
After removing the pump i've noticed, that there is no cover or something on the bottom of the pump:
Pumpe.jpg
How does the pump feed diesel usually? I think the impeller has to be covered, otherwise it will not work, right? Does anyone have a picture from the bottom of such a pump?
Maybe you wonder how the surface looks like. It's some real nasty dirt, don't know what exactly. I had to remove it mechanically, the pump runs very well.
Someone here who could help me? Thank you guys:giggle:
Kind regards from Germany
Daniel
 
FloridaAKM

FloridaAKM

Well-known member
2,699
392
83
Location
Gainesville, Florida
You are missing the base plate that makes the pump actually push fuel into the system. As it sits, it is just spinning fuel around the impeller, doing nothing. Your plate is more than likely in the bottom of your fuel tank in the same goo that the pump was sitting above. Time to go magnet fishing & see if you can retrieve your baseplate. Good luck!
 
V

VanMan

New member
10
9
3
Location
Trier/Germany
FloridaAKM said:
You are missing the base plate that makes the pump actually push fuel into the system. As it sits, it is just spinning fuel around the impeller, doing nothing. Your plate is more than likely in the bottom of your fuel tank in the same goo that the pump was sitting above. Time to go magnet fishing & see if you can retrieve your baseplate. Good luck!
Click to expand...
That's what I thought too. So I completely drained the fuel tank and cleaned the entire bottom, but there was no such plate. I think I have to recreate a new one. Which direction is the fuel suction from? From above (past the impeller shaft) or from the bottom (through a hole in the bottom plate)?
 
FloridaAKM

FloridaAKM

Well-known member
2,699
392
83
Location
Gainesville, Florida
Looking @ your pump from the bottom as your picture shows, the pump turns counterclockwise in order to pull fuel from the tank & force it into the hose headed to the water filter.

Years ago, when they were demilling unused MRAPS, they would sell brand new Parker fuel pumps that fit the need perfectly for a Deuce for $65.00. If you can't find an original pump or replacement base plate, that would be the route to go.
 
Floridianson

Floridianson

Well-known member
Steel Soldiers Supporter
7,409
2,503
113
Location
Interlachen Fl.
The tar looking stuff looks like asphaltenes and if you have a coating of it on the bottom of your tank I found a product called Fuel Ox for asphaltenes if you can get it over there. Also E85 gas seems to cut it pretty well. I used E85 first then drained tank of it then ran Fuel Ox in with new fuel and it has done real well. Had to change the filters once since then and carry a couple of spare filters in the truck.
 
frank8003

frank8003

In Memorial
In Memorial
6,426
4,985
113
Location
Ft. Lauderdale, Florida
Gringeltaube cut up a tank to clean, refurbish, enlarge. His photos indicate the baffles to seek for your plate the other side of.
I should have bought every one of those Parker pumps in existance!
 

Attachments

frank8003

frank8003

In Memorial
In Memorial
6,426
4,985
113
Location
Ft. Lauderdale, Florida
VanMan said:
Hello,
I've got a problem with my in-tank fuel pump.
The pump runs, but doesn't feed any diesel.
After removing the pump i've noticed, that there is no cover or something on the bottom of the pump:

How does the pump feed diesel usually? I think the impeller has to be covered, otherwise it will not work, right? Does anyone have a picture from the bottom of such a pump?
Maybe you wonder how the surface looks like. It's some real nasty dirt, don't know what exactly. I had to remove it mechanically, the pump runs very well.
Someone here who could help me? Thank you guys:giggle:
Kind regards from Germany
Daniel
Click to expand...
pump fuel in tank patent.jpg

$385 for a new one!
secoparts.net

M35A2 M54 In Tank Fuel Pump 2.5 Ton M39 Series 10947358-3 Military Tru

Military Truck Electric In Tank Fuel Pump Fits M39 M54 M35 M44 Series Trucks
secoparts.net secoparts.net

Has anyone tried to fit this pump in?

Got 3 in transit myself;-) The connectors look to be the same in the pics. me too
www.steelsoldiers.com
 

Attachments

Last edited:
V

VanMan

New member
10
9
3
Location
Trier/Germany
Hello guys, wish you a happy new year!
Thank you a lot, my pump is running. I couldn't find the original cover, so I built a new one. I had to try some different adhesives and improve the cover, but now it's satisfying (to me).
Here are some pictures:
 

Attachments

Last edited:
You must log in or register to reply here.
110,879members
165,311threads
2,326,195posts
2,138online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks